Class 9 Maths NCERT Solutions Chapter 1: Orienting Yourself — The Use of Coordinates (Ganita Manjari) | Boundless Maths
Home › Class 9 Maths & Science › Class 9 Maths NCERT Solutions, Part I › Chapter 1: Orienting Yourself — The Use of Coordinates
📘 Ganita Manjari · Part I · CBSE 2026-27 ✨ Free — No Sign-up 25 Questions

Chapter 1Orienting Yourself: The Use of Coordinates

Class 9 Maths Ganita Manjari NCERT Solutions Chapter 1: Orienting Yourself — The Use of Coordinates, from the CBSE 2026-27 textbook, with every step of working shown in full, exactly the way you'd be expected to present it in an answer sheet. Covers the origin and history of coordinate systems, the 2-D Cartesian plane, axes and quadrants, and the distance formula derived from the Baudhāyana–Pythagoras Theorem — including every "Think and Reflect" box, both Exercise Sets, and the End-of-Chapter questions, with plotted graphs and figures wherever the question calls for one.

25Solved Questions
4Think & Reflect
100%NCERT Aligned
Get the Class 9 Formula Card →

Key Concepts & Formulae at a Glance

  • A 2-D coordinate system uses two perpendicular lines — the horizontal x-axis and the vertical y-axis — to locate any point in a plane, the Cartesian plane.
  • The point where the axes meet is the origin O, with coordinates (0, 0).
  • A point's coordinates (x, y): x is its perpendicular distance from the y-axis (measured along the x-axis); y is its perpendicular distance from the x-axis (measured along the y-axis).
  • The axes divide the plane into four quadrants: Quadrant I (+, +), Quadrant II (–, +), Quadrant III (–, –), Quadrant IV (+, –).
  • Points on the x-axis have the form (x, 0); points on the y-axis have the form (0, y).
  • If x = y, then (x, y) = (y, x). If x ≠ y, then (x, y) ≠ (y, x) — order matters.
  • Distance between two points on a horizontal or vertical line is simply the absolute difference of their unequal coordinate.
\[ \text{By the Baudhāyana–Pythagoras Theorem:} \] \[ \text{Distance between } (x_1,y_1) \text{ and } (x_2,y_2) = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2} \]

This chapter opens with the history of coordinate systems — from the grid-planned streets of the Sindhu-Sarasvatī cities and Baudhāyana's East–West/North–South constructions, through Āryabhaṭa, Brahmagupta's formalisation of zero and negative numbers, Al-Bīrūnī, and finally Descartes' four-quadrant plane in 1637 CE.

The chapter then introduces Reiaan and Shalini, who use a pin-and-thread grid (Fig. 1.1) to map Reiaan's room so he can feel its layout — a physical, hands-on version of a coordinate system, using a scale of 1 cm : 1 foot.

Why can't the windows be marked on this map? Fig. 1.1 is a floor plan — a two-dimensional, top-down (bird's-eye) view of the room. It only records positions along the floor's length and breadth. A window is set into a wall at a certain height above the floor, so showing it needs a third piece of information (height) that a flat floor plan simply doesn't capture. To mark the windows, you would need a side view (elevation) of the walls, or a full 3-D coordinate system with a third axis for height.

The horizontal line is the x-axis and the vertical line is the y-axis. Their intersection, the origin O, has coordinates (0, 0). Distances to the right of O or upward from O are positive; distances to the left of O or downward from O are negative.

−7 −6 −5 −4 −3 −2 −1 1 2 3 4 5 6 7 −5 −4 −3 −2 −1 1 2 3 4 5 x y O B = (4.5, 0) E = (−2.9, 0) H = (0, 4) G = (0, −4.5)

Fig. 1.2: Points on the axes — B(4.5, 0) and E(−2.9, 0) on the x-axis; H(0, 4) and G(0, −4.5) on the y-axis.

A point P = (x, 0) lies on the x-axis (right of O if x > 0, left of O if x < 0). A point P = (0, y) lies on the y-axis (above O if y > 0, below O if y < 0).

Exercise Set 1.1

Based on Fig. 1.3 — Reiaan's room, with corners O(0,0), A(12,0), B(12,10), C(0,10); wardrobe corners W1(3,0), W2(7,0), W3(7,2), W4(3,2); bed corners S1(0.5,5), S2(6.5,5), S3(6.5,8), S4(0.5,8); room door D1R1; bathroom door B1B2.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 x y Bed Wardrobe C (0, 10) B (12, 10) O (0, 0) A (12, 0) S1 S2 S3 S4 W1 W2 W3 W4 D1 R1 B1 B2

Fig. 1.3: Reiaan’s room — bed (blue), wardrobe (brown); the room door D1R1 and bathroom door B1B2 are marked in red.

1Fig. 1.3 shows Reiaan's room with points OABC marking its corners. The x- and y-axes are marked in the figure. Point O is the origin.
Referring to Fig. 1.3, answer the following questions:
(i) If D1R1 represents the door to Reiaan's room, how far is the door from the left wall (the y-axis) of the room? How far is the door from the x-axis?
(ii) What are the coordinates of D1?
(iii) If R1 is the point (11.5, 0), how wide is the door? Do you think this is a comfortable width for the room door? If a person in a wheelchair wants to enter the room, will he/she be able to do so easily?
(iv) If B1 (0, 1.5) and B2 (0, 4) represent the ends of the bathroom door, is the bathroom door narrower or wider than the room door?
Bed Wardrobe 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 C (0, 10) B (12, 10) A (12, 0) O (0, 0) F S4 S3 S1 S2 W4 W3 W1 W2 D1 R1 (11.5, 0) B1 B2 x-axis y-axis Right wall

Fig. 1.3 (redrawn from the textbook)

(i) The door D1R1 lies along the bottom wall of the room, which is the x-axis itself (y = 0), so its distance from the x-axis is 0. Its near end, D1, is 8 ft from the left wall (the y-axis), since D1 = (8, 0).

(ii) Coordinates of D1 = (8, 0).

(iii) Width of the door = distance D1R1 = x-coordinate of R1 − x-coordinate of D1 = \(11.5 - 8 = 3.5\) ft. A standard interior door is around 2.5–3 ft wide, and accessible doorways need at least about 2.7 ft (32 inches) of clear width, so a 3.5 ft door is generous — comfortable to walk through, and wide enough for a person using a wheelchair to enter easily.

(iv) Width of the bathroom door = distance B1B2 = \(4 - 1.5 = 2.5\) ft. Since \(2.5 \text{ ft} < 3.5 \text{ ft}\), the bathroom door is narrower than the room door.

Door D1R1: 8 ft from the left wall, 0 ft from the x-axis (it lies on it) · D1 = (8, 0) · Width = 3.5 ft (comfortable, wheelchair-accessible) · Bathroom door width = 2.5 ft — narrower than the room door.

Think and Reflect

TR1. What are the standard widths for a room door? Look around your home and in school.
2. Are the doors in your school suitable for people in wheelchairs?

1. Standard interior room doors are usually about 2.5 ft to 3 ft (30–36 inches) wide; main entrance doors are often wider, around 3.5 ft (42 inches). Measuring the doors around your own home and school is the best way to check these figures against real life.

2. A doorway needs a clear width of roughly 2.7 ft (32 inches) or more, ideally 3 ft (36 inches), for a wheelchair to pass through comfortably. Whether your school's doors meet this depends on the actual doors — this is an open, observation-based question for you to check and discuss in class.

This is an open-ended, real-world observation task — measure a few doors around you and compare them with the 2.5–3 ft (interior) and ~3 ft-plus (accessible) guidelines above.
−8 −7 −6 −5 −4 −3 −2 −1 1 2 3 4 5 6 7 −5 −4 −3 −2 −1 1 2 3 4 x y O Quadrant II Quadrant I Quadrant III Quadrant IV Q (−5, 3) S (3, −5)

Fig. 1.4: Q(−5, 3) lies in Quadrant II; S(3, −5) lies in Quadrant IV.

Think and Reflect

TR1. What is the x-coordinate of a point on the y-axis?
2. Is there a similar generalisation for a point on the x-axis?
3. Does point Q (y, x) ever coincide with point P (x, y)? Justify your answer.
4. If x ≠ y, then (x, y) ≠ (y, x); and (x, y) = (y, x) if and only if x = y. Is this claim true?

1. Every point on the y-axis has x-coordinate 0 — it has zero perpendicular distance from the y-axis, since it lies on it.

2. Yes — by the same reasoning, every point on the x-axis has y-coordinate 0.

3. Yes, but only when x = y. Points P(x, y) and Q(y, x) coincide exactly when their corresponding coordinates match: the x-coordinate of P (which is x) must equal the x-coordinate of Q (which is y), i.e. \(x = y\). When this holds, both points reduce to the same pair, e.g. P(3,3) = Q(3,3).

4. This is true. Two ordered pairs (x, y) and (y, x) are equal only when corresponding entries match: first entries equal (\(x=y\)) and second entries equal (\(y=x\)) — both conditions are really the same single condition, \(x=y\). So if \(x \ne y\), the pairs (x,y) and (y,x) genuinely represent two different points (e.g. (3,5) and (5,3) are different locations), and they coincide only in the special case x = y.

x-coordinate on the y-axis = 0; y-coordinate on the x-axis = 0. (x,y) = (y,x) if and only if x = y — order matters whenever the two coordinates differ.

Exercise Set 1.2

On a graph sheet, mark the x-axis from (–7, 0) to (13, 0) and the y-axis from (0, –15) to (0, 12), using the scale 1 cm = 1 unit. Fig. 1.5 adds a bathroom (6 ft × 9 ft) to the left of Reiaan's bedroom from Fig. 1.3, with corners O(0,0), F(0,9), R(–6,9), P(–6,0), and a showering area SHWR.

−6 −4 −2 2 4 6 8 10 12 2 4 6 8 x y Shower Basin Toilet Bedroom Bed Wardrobe C B (12, 10) R W H S F P O A

Fig. 1.5: Reiaan’s bedroom with the 6 ft × 9 ft bathroom OFRP on its left — showering area SHWR (green), washbasin and toilet spaces (purple).

1Place Reiaan's rectangular study table with three of its feet at the points (8, 9), (11, 9) and (11, 7).
(i) Where will the fourth foot of the table be?
(ii) Is this a good spot for the table?
(iii) What is the width of the table? The length? Can you make out the height of the table?
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 x y Bed Wardrobe Table A (8, 9) B (11, 9) C (11, 7) D (8, 7)

Study table ABCD: A(8, 9), B(11, 9), C(11, 7) given, D(8, 7) is the fourth foot — clear of the bed and inside the room.

Let the three given feet be A(8,9), B(11,9), C(11,7). AB is horizontal (both have y = 9), and BC is vertical (both have x = 11) — so ABC is already a right angle at B, and the table is a rectangle.

(i) The fourth foot D must share its x-coordinate with A (8) and its y-coordinate with C (7), completing the rectangle: \(D = (8, 7)\).

(ii) The table occupies x from 8 to 11 and y from 7 to 9. The bed (Fig. 1.3) occupies x from 0.5 to 6.5 and y from 5 to 8 — since the table's smallest x-value (8) is greater than the bed's largest x-value (6.5), the table doesn't overlap the bed. The whole table also lies comfortably inside the room boundary (0 ≤ x ≤ 12, 0 ≤ y ≤ 10). So yes, this is a good, clear spot for the table.

(iii) Width = \(BC = |9-7| = 2\) ft. Length = \(AB = |11-8| = 3\) ft. The height of the table cannot be determined — a floor plan is a top-down 2-D view and carries no information about how tall an object is; you'd need a side view (elevation) for that.

Fourth foot: (8, 7) · Good spot — no overlap with the bed, and fits inside the room · Width = 2 ft, Length = 3 ft · Height cannot be read off a floor plan.
2If the bathroom door has a hinge at B1 and opens into the bedroom, will it hit the wardrobe? Are there any changes you would suggest if the door is made wider?
Bed Wardrobe −6 −5 −4 −3 −2 −1 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 C (0, 10) B (12, 10) A (12, 0) O (0, 0) P R W F S H S4 S3 S1 S2 W4 W3 W1 W2 D1 R1 (11.5, 0) B1 B2 Showering Area Bathroom x-axis y-axis Right wall

Fig. 1.5 (redrawn from the textbook)

The bathroom door has hinge at \(B_1 = (0, 1.5)\), and its width is 2.5 ft (from Exercise Set 1.1). Swinging fully open into the bedroom, the door sweeps out a quarter-circle arc of radius 2.5 ft, centred at \(B_1\).

The wardrobe occupies x from 3 to 7 and y from 0 to 2. The hinge B1 = (0, 1.5) has a y-coordinate between 0 and 2, so the point of the wardrobe nearest to the hinge is the point (3, 1.5) on its left edge W1W4, directly across from the hinge. The distance from the hinge to this point is:

\(\sqrt{(3-0)^2+(1.5-1.5)^2} = \sqrt{9} = 3 \text{ ft}\)

Since the nearest point of the wardrobe (3 ft away) is farther than the door's swing radius (2.5 ft), the door's arc doesn't reach the wardrobe — it will not hit it, with 0.5 ft of clearance to spare.

If the door were made wider, the clearance would shrink: at a width beyond 3 ft, the swinging door would begin to strike the wardrobe's left edge. So if the door is widened, the wardrobe would need to be moved slightly farther from the bathroom wall (or the door could be hinged to swing the other way) to keep it clear.

No — the door (radius 2.5 ft) stops 0.5 ft short of the wardrobe (3 ft from the hinge). A door wider than 3 ft would hit it, so the wardrobe would need to be moved back, or the door re-hinged.
3(i) What are the coordinates of the four corners O, F, R, and P of the bathroom?
(ii) What is the shape of the showering area SHWR? Write the coordinates of its four corners.
(iii) Mark off a 3 ft × 2 ft space for the washbasin and a 2 ft × 3 ft space for the toilet. Write the coordinates of the corners of these spaces.
−6 −5 −4 −3 −2 −1 1 2 3 4 5 6 7 8 9 Shower Basin Toilet R (−6, 9) W (−2, 9) F (0, 9) S (−6, 6) H (−3, 6) P (−6, 0) O (0, 0)

Bathroom OFRP (6 ft × 9 ft): showering area SHWR at the top-left, washbasin (3 ft × 2 ft) and toilet (2 ft × 3 ft) below it.

(i) The bathroom measures 6 ft × 9 ft (as given), sharing its bottom-right corner with the bedroom's origin. Its four corners are: \(O=(0,0)\), \(F=(0,9)\), \(R=(-6,9)\), \(P=(-6,0)\).

(ii) The showering area SHWR sits in the upper part of the bathroom, sharing corner R with the bathroom outline. It is a right-angled trapezium with corners \(S=(-6,6)\), \(H=(-3,6)\), \(W=(-2,9)\), \(R=(-6,9)\): SH is horizontal (length 3 ft), RW is horizontal (length 4 ft), and SR is vertical (length 3 ft), so SH ∥ RW and SR is perpendicular to both. The slanted side is HW = \(\sqrt{1^2+3^2}=\sqrt{10}\) ft.

(iii) In the remaining lower portion of the bathroom (from y = 0 to y = 6), place the washbasin (3 ft × 2 ft) in the bottom-left corner and the toilet (2 ft × 3 ft) above it, both against the left wall:

Washbasin corners: \((-6,0),\ (-3,0),\ (-3,2),\ (-6,2)\)

Toilet corners: \((-6,2.5),\ (-4,2.5),\ (-4,5.5),\ (-6,5.5)\)

The washbasin occupies y from 0 to 2 and the toilet y from 2.5 to 5.5, so they don't overlap each other, and both stay below y = 6, so they don't overlap the showering area. (Other placements are equally acceptable.)

Bathroom corners: O(0,0), F(0,9), R(-6,9), P(-6,0) · Shower area SHWR: a right-angled trapezium, S(-6,6), H(-3,6), W(-2,9), R(-6,9) · Washbasin: (-6,0),(-3,0),(-3,2),(-6,2) · Toilet: (-6,2.5),(-4,2.5),(-4,5.5),(-6,5.5)
4Other rooms in the house:
(i) Reiaan's room door leads from the dining room which has the length 18 ft and width 15 ft. The length of the dining room extends from point P to point A. Sketch the dining room and mark the coordinates of its corners.
(ii) Place a rectangular 5 ft × 3 ft dining table precisely in the centre of the dining room. Write down the coordinates of the feet of the table.
x y −6 0 6 12 −5 −10 −15 Table centre (3, −7.5) (0.5, −6) (5.5, −6) (0.5, −9) (5.5, −9) P (−6, 0) A (12, 0) (−6, −15) (12, −15) Dining room: 18 ft × 15 ft

Dining room with corners P(−6, 0), A(12, 0), (12, −15), (−6, −15): 18 ft along the x-axis, 15 ft below it, with the 5 ft × 3 ft table at its centre.

(i) P = (–6, 0) and A = (12, 0) both lie on the x-axis, and the distance between them is \(12-(-6)=18\) ft — exactly the given length of the dining room, confirming it runs along the x-axis from P to A. Since the bedroom and bathroom occupy the region above the x-axis (y ≥ 0), the dining room (width 15 ft) must extend downward, into negative y:

Dining room corners: \(P(-6,0)\), \(A(12,0)\), \((12,-15)\), \((-6,-15)\).

(ii) The centre of this 18 ft × 15 ft rectangle is the average of opposite corners: centre \(=\left(\dfrac{-6+12}{2}, \dfrac{0+(-15)}{2}\right) = (3,-7.5)\).

Placing a 5 ft × 3 ft table centred here (2.5 ft either side along x, 1.5 ft either side along y):

Table corners: \((0.5,-9),\ (5.5,-9),\ (5.5,-6),\ (0.5,-6)\)

Dining room corners: P(-6,0), A(12,0), (12,-15), (-6,-15) · Dining table corners: (0.5,-9), (5.5,-9), (5.5,-6), (0.5,-6)

Distances along or parallel to the axes are easy to find directly. For a segment that isn't parallel to either axis, we build a right triangle using the horizontal and vertical shifts, then apply the Baudhāyana–Pythagoras Theorem.

1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 x y O A (3, 4) D (7, 1) M (9, 6) C (3, 1) 3 4 AD = 5

Fig. 1.6 and 1.7: Triangle ADM in Quadrant I. The construction point C(3, 1) gives the right triangle ACD with legs AC = 3 and CD = 4, so AD = 5.

Think and Reflect

TR1. In moving from A (3, 4) to D (7, 1), what distance has been covered along the x-axis? What about the distance along the y-axis?
2. Can these distances help you find the distance AD?
−1 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 A (3, 4) M (9, 6) D (7, 1) C (3, 1) x-axis y-axis

Fig. 1.6 and Fig. 1.7 (redrawn from the textbook): triangle ADM with the construction point C (3, 1).

1. Along the x-axis, the shift is \(7-3=4\) units. Along the y-axis, the shift is \(4-1=3\) units (moving downward from y = 4 to y = 1).

2. Yes — these two shifts are the legs of a right triangle whose hypotenuse is exactly the segment AD (using the construction point C(3,1) as the right-angle vertex). By the Baudhāyana–Pythagoras Theorem: \(AD=\sqrt{4^2+3^2}=\sqrt{25}=5\) units.

Shift along x-axis = 4, shift along y-axis = 3, and AD = √(4² + 3²) = 5 units.
−12 −10 −8 −6 −4 −2 2 4 6 8 10 12 2 4 6 x y O A (3, 4) D (7, 1) M (9, 6) A′ (−3, 4) D′ (−7, 1) M′ (−9, 6)

Fig. 1.9: Triangle ADM (Quadrant I) and its reflection A′D′M′ in the y-axis (Quadrant II) — the mirror image has the same side lengths.

Think and Reflect

TR1. What has remained the same and what has changed with this reflection?
2. Would these observations be the same if ΔADM is reflected in the x-axis (instead of the y-axis)?
−9 −8 −7 −6 −5 −4 −3 −2 −1 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 A (3, 4) M (9, 6) D (7, 1) C (3, 1) A′ (−3, 4) M′ (−9, 6) D′ (−7, 1) C′ (−3, 1) x-axis y-axis

Fig. 1.9 (redrawn from the textbook): triangle ADM and its reflection in the y-axis.

1. Reflecting in the y-axis negates every x-coordinate while leaving y-coordinates unchanged: A(3,4)→A'(-3,4), D(7,1)→D'(-7,1), M(9,6)→M'(-9,6). Since the distance formula depends only on the squares of the coordinate differences, and squaring removes the effect of a sign flip, all three side lengths stay exactly the same (AD = A'D' = 5, DM = D'M' = √29, MA = M'A' = √40). What changes is the triangle's position and orientation — it now sits as a mirror image in Quadrant II instead of Quadrant I.

2. Yes, the same reasoning applies. Reflecting in the x-axis instead negates the y-coordinates and leaves x-coordinates unchanged. Since squaring again removes the sign change, all side lengths would still be preserved. Only the triangle's position changes — it would now appear as a mirror image below the x-axis (in Quadrant IV) rather than above it.

Reflection preserves all distances/side lengths (since squaring removes the sign flip) but changes the figure's position — a mirror image appears on the opposite side of whichever axis it's reflected in.

End-of-Chapter Exercises

1What are the x-coordinate and y-coordinate of the point of intersection of the two axes?

The two axes intersect at the origin, which is defined to have coordinates (0, 0).

x-coordinate = 0, y-coordinate = 0.
2Point W has x-coordinate equal to –5. Can you predict the coordinates of point H which is on the line through W parallel to the y-axis? Which quadrants can H lie in?

A line parallel to the y-axis is a vertical line, on which every point shares the same x-coordinate. Since W has x-coordinate –5, every point on this line — including H — also has x-coordinate –5. So \(H=(-5,y)\) for some value of y.

If \(y>0\), H lies in Quadrant II (–, +). If \(y<0\), H lies in Quadrant III (–, –). If \(y=0\), H lies on the x-axis itself, not inside a quadrant.

H = (–5, y) for some y; H can lie in Quadrant II (if y > 0) or Quadrant III (if y < 0).
3Consider the points R (3, 0), A (0, –2), M (–5, –2) and P (–5, 2). If they are joined in the same order, predict:
(i) Two sides of RAMP that are perpendicular to each other.
(ii) One side of RAMP that is parallel to one of the axes.
(iii) Two points that are mirror images of each other in one axis. Which axis will this be?
Now plot the points and verify your predictions.
−6 −5 −4 −3 −2 −1 1 2 3 4 5 6 −3 −2 −1 1 2 3 x y O R (3, 0) A (0, −2) M (−5, −2) P (−5, 2)

Quadrilateral RAMP with R(3, 0), A(0, −2), M(−5, −2), P(−5, 2): AM is horizontal, MP is vertical, and M, P are mirror images in the x-axis.

(i) Side AM runs from A(0,–2) to M(–5,–2): both points share y = –2, so AM is horizontal. Side MP runs from M(–5,–2) to P(–5,2): both points share x = –5, so MP is vertical. A horizontal side and a vertical side are always perpendicular, so AM ⊥ MP.

(ii) AM (y = –2 throughout) is parallel to the x-axis; MP (x = –5 throughout) is parallel to the y-axis. Either is a valid answer.

(iii) M(–5,–2) and P(–5,2) share the same x-coordinate (–5), while their y-coordinates are equal in magnitude but opposite in sign (–2 and 2). This is exactly the condition for two points to be reflections of each other in the x-axis.

(i) AM ⊥ MP ·
(ii) AM ∥ x-axis (and MP ∥ y-axis) ·
(iii) M and P are mirror images of each other in the x-axis.
4Plot point Z (5, –6) on the Cartesian plane. Construct a right-angled triangle IZN and find the lengths of the three sides. (Comment: Answers may differ from person to person.)
1 2 3 4 5 6 −6 −4 −2 x y O I (5, 0) Z (5, −6) N (0, −6) 6 5 √61

Right triangle IZN with I(5, 0), Z(5, −6), N(0, −6): the right angle is at Z, with IZ = 6, ZN = 5 and IN = √61.

Since answers can vary, here is one valid construction: choose \(I=(5,0)\), directly above Z on the x-axis, and \(N=(0,-6)\), directly left of Z on the y-axis. Then IZ is vertical and ZN is horizontal, so the right angle sits at Z.

\(IZ = |0-(-6)| = 6\) units

\(ZN = |5-0| = 5\) units

\(IN = \sqrt{(5-0)^2+(0-(-6))^2} = \sqrt{25+36} = \sqrt{61}\) units

One valid triangle: I(5,0), Z(5,-6), N(0,-6), right angle at Z, with IZ = 6, ZN = 5, IN = √61 units. (Any other choice of I and N that keeps IZ ⊥ ZN is equally valid.)
5What would a system of coordinates be like if we did not have negative numbers? Would this system allow us to locate all the points on a 2-D plane?

Without negative numbers, both coordinates of every point would have to be zero or positive. This restricts every locatable point to Quadrant I (together with the non-negative parts of the two axes) — just one quarter of the full plane.

Points in Quadrant II, III, or IV (any point with at least one negative coordinate) could not be assigned coordinates at all. So no, such a system would not allow us to locate every point on the 2-D plane — it was precisely Brahmagupta's formalisation of negative numbers that made the full four-quadrant Cartesian plane possible.

Without negative numbers, only Quadrant I (one quarter of the plane) could be described — the rest of the plane would be unreachable.
6*Are the points M (–3, –4), A (0, 0) and G (6, 8) on the same straight line? Suggest a method to check this without plotting and joining the points.
−4 −2 2 4 6 −4 −2 2 4 6 8 x y M (−3, −4) A (0, 0) G (6, 8)

M(−3, −4), A(0, 0) and G(6, 8) lie on one straight line, with MA = 5, AG = 10 and MG = 15.

Method: If three points lie on one straight line, the distance between the two outer points equals the sum of the other two distances (the middle point lies on the segment joining them). So we find the three distances with the distance formula and check whether the longest equals the sum of the other two.

\(MA=\sqrt{(0-(-3))^2+(0-(-4))^2}=\sqrt{9+16}=5\)

\(AG=\sqrt{(6-0)^2+(8-0)^2}=\sqrt{36+64}=10\)

\(MG=\sqrt{(6-(-3))^2+(8-(-4))^2}=\sqrt{81+144}=\sqrt{225}=15\)

Since \(MA+AG=5+10=15=MG\), the point A lies on the segment MG, so M, A and G lie on the same straight line.

Yes — MA + AG = 5 + 10 = 15 = MG, so M, A and G are collinear (A lies between M and G).
7*Use your method (from Problem 6) to check if the points R (–5, –1), B (–2, –5) and C (4, –12) are on the same straight line. Now plot both sets of points and check your answers.
−4 −2 2 4 6 8 −12 −10 −8 −6 −4 −2 x y R (−5, −1) B (−2, −5) C (4, −12) O

R(−5, −1), B(−2, −5) and C(4, −12): B does not lie on the straight line RC (dashed), so the points are not collinear.

\(RB=\sqrt{(-2-(-5))^2+(-5-(-1))^2}=\sqrt{9+16}=5\)

\(BC=\sqrt{(4-(-2))^2+(-12-(-5))^2}=\sqrt{36+49}=\sqrt{85}\)

\(RC=\sqrt{(4-(-5))^2+(-12-(-1))^2}=\sqrt{81+121}=\sqrt{202}\)

RC is the longest of the three distances, so if the points were collinear we would need \(RB+BC=RC\), that is \(5+\sqrt{85}=\sqrt{202}\). Squaring both sides, \((5+\sqrt{85})^2=110+10\sqrt{85}\), and this would have to equal 202, giving \(\sqrt{85}=9.2\), i.e. \(85=84.64\) — which is false. (Numerically, \(5+\sqrt{85}\approx 14.22\) while \(\sqrt{202}\approx 14.21\): very close, but not equal.) So R, B and C are not on the same straight line.

No — RB + BC = 5 + √85 ≈ 14.22, but RC = √202 ≈ 14.21, so RB + BC ≠ RC and R, B, C are not collinear.
8*Using the origin as one vertex, plot the vertices of:
(i) A right-angled isosceles triangle.
(ii) An isosceles triangle with one vertex in Quadrant III and the other in Quadrant IV.
−4 −3 −2 −1 1 2 3 4 5 −5 −4 −3 −2 −1 1 2 3 4 5 x y O (4, 0) (0, 4) (−3, −4) (3, −4)

(i) Right-angled isosceles triangle O(0, 0), (4, 0), (0, 4) — gold.
(ii) Isosceles triangle O, (−3, −4), (3, −4), with two sides of length 5 — green.

(i) Choose O(0,0), (4,0) and (0,4). OA and OB are perpendicular (one along each axis) and equal in length (both 4 units), giving a right angle at O with two equal legs — a right-angled isosceles triangle.

(ii) Choose O(0,0) as the third vertex, with one vertex \((-3,-4)\) in Quadrant III and another \((3,-4)\) in Quadrant IV. Both of these are the same distance from O: \(\sqrt{3^2+4^2}=\sqrt{9+16}=5\) each — so the triangle formed with O is isosceles (two sides of length 5).

(i) O(0,0), (4,0), (0,4) — right-angled isosceles, legs of 4 units each.
(ii) O(0,0), (–3,–4) in Quadrant III, (3,–4) in Quadrant IV — isosceles, with both slanted sides equal to 5 units.
9*The following table shows the coordinates of points S, M and T. In each case, state whether M is the midpoint of segment ST. Justify your answer. When M is the mid-point of ST, can you find any connection between the coordinates of M, S and T?

M is the midpoint of ST exactly when its coordinates are the average of the corresponding coordinates of S and T: \(M=\left(\dfrac{x_S+x_T}{2},\dfrac{y_S+y_T}{2}\right)\).

SMTMidpoint of ST?Reason
(–3, 0)(0, 0)(3, 0)Yes\(\left(\frac{-3+3}{2},\frac{0+0}{2}\right)=(0,0)=M\)
(2, 3)(3, 4)(4, 5)Yes\(\left(\frac{2+4}{2},\frac{3+5}{2}\right)=(3,4)=M\)
(0, 0)(0, 5)(0, –10)No\(\left(\frac{0+0}{2},\frac{0-10}{2}\right)=(0,-5)\ne(0,5)\)
(–8, 7)(0, –2)(6, –3)No\(\left(\frac{-8+6}{2},\frac{7-3}{2}\right)=(-1,2)\ne(0,-2)\)
M is the midpoint of ST exactly when M's coordinates equal the average of S's and T's corresponding coordinates: \(M=\left(\dfrac{x_S+x_T}{2},\dfrac{y_S+y_T}{2}\right)\). Rows 1 and 2: Yes. Rows 3 and 4: No.
10*Use the connection you found to find the coordinates of B given that M (–7, 1) is the midpoint of A (3, –4) and B (x, y).

Using the midpoint connection from Problem 9: \(-7=\dfrac{3+x}{2}\) and \(1=\dfrac{-4+y}{2}\).

\(3+x=-14 \Rightarrow x=-17\)

\(-4+y=2 \Rightarrow y=6\)

B = (–17, 6).
11*Let P, Q be points of trisection of AB, with P closer to A, and Q closer to B. Using your knowledge of how to find the coordinates of the midpoint of a segment, how would you find the coordinates of P and Q? Do this for the case when the points are A (4, 7) and B (16, –2).

P is one-third of the way from A to B, and Q is two-thirds of the way from A to B. So \(P=A+\dfrac{1}{3}(B-A)\) and \(Q=A+\dfrac{2}{3}(B-A)\).

\(B-A = (16-4,\ -2-7) = (12,-9)\)

\(P = (4,7)+\dfrac{1}{3}(12,-9) = (4+4,\ 7-3) = (8,4)\)

\(Q = (4,7)+\dfrac{2}{3}(12,-9) = (4+8,\ 7-6) = (12,1)\)

P = (8, 4), Q = (12, 1).
12*(i) Given the points A (1, –8), B (–4, 7) and C (–7, –4), show that they lie on a circle K whose center is the origin O (0, 0). What is the radius of circle K?
(ii) Given the points D (–5, 6) and E (0, 9), check whether D and E lie within the circle, on the circle, or outside the circle K.
−8 −6 −4 −2 2 4 6 8 −8 −6 −4 −2 2 4 6 8 10 x y O √65 A (1, −8) B (−4, 7) C (−7, −4) D (−5, 6) E (0, 9)

Circle K with centre O and radius √65 passes through A, B and C. D lies inside it and E lies outside it.

(i) A point lies on a circle centred at O exactly when its distance from O equals the circle's radius. Computing OA, OB, OC:

\(OA=\sqrt{1^2+(-8)^2}=\sqrt{1+64}=\sqrt{65}\)

\(OB=\sqrt{(-4)^2+7^2}=\sqrt{16+49}=\sqrt{65}\)

\(OC=\sqrt{(-7)^2+(-4)^2}=\sqrt{49+16}=\sqrt{65}\)

All three distances equal \(\sqrt{65}\), so A, B and C all lie on a circle of radius \(\sqrt{65}\) centred at O.

(ii) \(OD=\sqrt{(-5)^2+6^2}=\sqrt{25+36}=\sqrt{61}\). Since \(\sqrt{61} < \sqrt{65}\), D lies inside the circle.

\(OE=\sqrt{0^2+9^2}=\sqrt{81}=9\). Since \(9 = \sqrt{81} > \sqrt{65} \approx 8.06\), E lies outside the circle.

Radius of K = √65. D (distance √61 < √65) lies inside the circle; E (distance 9 > √65) lies outside the circle.
13*The midpoints of the sides of triangle ABC are the points D, E, and F. Given that the coordinates of D, E, and F are (5, 1), (6, 5), and (0, 3), respectively, find the coordinates of A, B and C.
−2 2 4 6 8 10 12 14 2 4 6 8 x y O A (1, 7) B (−1, −1) C (11, 3) D (5, 1) E (6, 5) F (0, 3)

Triangle ABC (blue) with the triangle DEF (gold) joining the midpoints of its sides: D(5, 1) on BC, E(6, 5) on CA and F(0, 3) on AB.

Take D, E, F as the midpoints of BC, CA and AB respectively. Each vertex can be recovered from the other two midpoints minus the opposite one — for instance, since \(E=\frac{A+C}{2}\) and \(F=\frac{A+B}{2}\), adding them gives \(E+F=A+\frac{B+C}{2}=A+D\), so \(A=E+F-D\). The same pattern gives B and C.

\(A = E+F-D = (6,5)+(0,3)-(5,1) = (6+0-5,\ 5+3-1) = (1,7)\)

\(B = D+F-E = (5,1)+(0,3)-(6,5) = (5+0-6,\ 1+3-5) = (-1,-1)\)

\(C = D+E-F = (5,1)+(6,5)-(0,3) = (5+6-0,\ 1+5-3) = (11,3)\)

Check: midpoint of BC \(=\left(\frac{-1+11}{2},\frac{-1+3}{2}\right)=(5,1)=D\) ✓;
midpoint of CA \(=\left(\frac{11+1}{2},\frac{3+7}{2}\right)=(6,5)=E\) ✓;
midpoint of AB \(=\left(\frac{1-1}{2},\frac{7-1}{2}\right)=(0,3)=F\) ✓.

A = (1, 7), B = (–1, –1), C = (11, 3).
14A city has two main roads which cross each other at the centre of the city. These two roads are along the North–South (N–S) direction and East–West (E–W) direction. All the other streets of the city run parallel to these roads and are 200 m apart. There are 10 streets in each direction.
(i) Using 1 cm = 200 m, draw a model of the city in your notebook. Represent the roads/streets by single lines.
(ii) There are street intersections in the model. Each street intersection is formed by two streets — one running in the N–S direction and another in the E–W direction. Each street intersection is referred to in the following manner: If the second street running in the N–S direction and 5th street in the E–W direction meet at some crossing, then we call this street intersection (2, 5). Using this convention, find:
(a) how many street intersections can be referred to as (4, 3).
(b) how many street intersections can be referred to as (3, 4).
1 1 2 2 3 3 4 4 5 5 6 6 N–S street number E–W street (4, 3) (3, 4)

Streets 1–6 are shown (the city has 10 each way). (4, 3) is where the 4th N–S street meets the 3rd E–W street; (3, 4) is a different crossing.

(i) With 1 cm = 200 m, adjacent streets are 1 cm apart, so the model is a grid of 10 vertical lines (N–S streets) and 10 horizontal lines (E–W streets), each 1 cm from the next, crossing at 100 intersections (the figure above shows the first six streets each way).

(ii) Each ordered pair (a, b) names one specific N–S street and one specific E–W street; exactly one point marks where that particular pair of streets crosses. So each label (a, b) refers to exactly one intersection.

(a) (4, 3): exactly 1 intersection — where the 4th N–S street meets the 3rd E–W street.

(b) (3, 4): exactly 1 intersection — where the 3rd N–S street meets the 4th E–W street. This is a different physical location from (4, 3), just as (x, y) ≠ (y, x) in general — swapping the order changes which streets are being named.

(a) 1 intersection.
(b) 1 intersection — and it's a different crossing from (4, 3), illustrating that street coordinates, like point coordinates, are ordered pairs.
15A computer graphics program displays images on a rectangular screen whose coordinate system has the origin at the bottom-left corner. The screen is 800 pixels wide and 600 pixels high. A circular icon of radius 80 pixels is drawn with its centre at the point A (100, 150). Another circular icon of radius 100 pixels is drawn with its centre at the point B (250, 230). Determine:
(i) whether any part of either circle lies outside the screen.
(ii) whether the two circles intersect each other.
0 200 400 600 800 200 400 600 A B A: centre (100, 150), r = 80 B: centre (250, 230), r = 100

The 800 × 600 screen (origin at bottom-left) with circle A and circle B drawn to scale — both lie fully inside the screen and overlap each other.

(i) For circle A (centre (100,150), radius 80): leftmost x = \(100-80=20\), rightmost x = \(100+80=180\), bottom y = \(150-80=70\), top y = \(150+80=230\). All of these lie within \(0 \le x \le 800\) and \(0 \le y \le 600\), so circle A is entirely on-screen.

For circle B (centre (250,230), radius 100): leftmost x = \(250-100=150\), rightmost x = \(250+100=350\), bottom y = \(230-100=130\), top y = \(230+100=330\). These also all lie within the screen, so circle B is entirely on-screen too.

(ii) Distance between the centres: \(\sqrt{(250-100)^2+(230-150)^2}=\sqrt{150^2+80^2}=\sqrt{22500+6400}=\sqrt{28900}=170\).

Sum of radii \(=80+100=180\); difference of radii \(=100-80=20\). Since \(20 < 170 < 180\), the distance between centres is less than the sum of the radii but more than their difference — so the two circles intersect (overlap partially, crossing at two points).

(i) Neither circle lies outside the screen — both are fully contained within it.
(ii) Yes, the two circles intersect each other (centre distance 170 lies strictly between 20 and 180).
16Plot the points A (2, 1), B (–1, 2), C (–2, –1), and D (1, –2) in the coordinate plane. Is ABCD a square? Can you explain why? What is the area of this square?
−3 −2 −1 1 2 3 −3 −2 −1 1 2 3 x y O A (2, 1) B (−1, 2) C (−2, −1) D (1, −2)

Square ABCD with A(2, 1), B(−1, 2), C(−2, −1), D(1, −2); the diagonals AC and BD (dashed) are equal, each √20.

Compute all four sides using the distance formula:

\(AB=\sqrt{(2-(-1))^2+(1-2)^2}=\sqrt{9+1}=\sqrt{10}\)

\(BC=\sqrt{(-1-(-2))^2+(2-(-1))^2}=\sqrt{1+9}=\sqrt{10}\)

\(CD=\sqrt{(-2-1)^2+(-1-(-2))^2}=\sqrt{9+1}=\sqrt{10}\)

\(DA=\sqrt{(1-2)^2+(-2-1)^2}=\sqrt{1+9}=\sqrt{10}\)

All four sides are equal (\(\sqrt{10}\)), so ABCD is at least a rhombus. Now check the diagonals:

\(AC=\sqrt{(2-(-2))^2+(1-(-1))^2}=\sqrt{16+4}=\sqrt{20}\)

\(BD=\sqrt{(-1-1)^2+(2-(-2))^2}=\sqrt{4+16}=\sqrt{20}\)

The diagonals are also equal. A rhombus (all sides equal) whose diagonals are also equal must be a square — so ABCD is indeed a square.

Area \(=\text{side}^2=(\sqrt{10})^2=10\) square units. (Check: for a square, area \(=\frac{1}{2}d^2 = \frac{1}{2}(\sqrt{20})^2=\frac{1}{2}(20)=10\), which matches.)

Yes, ABCD is a square — all four sides equal √10 and both diagonals equal √20 (a rhombus with equal diagonals is a square). Area = 10 square units.

Extra Practice Questions

Seven extra questions in the style of the textbook's own exercises, for independent practice once you've gone through the solved questions above. Each one is shown open with its full working, since a diagram is part of the answer here — cover the solution with your hand and attempt it on paper first.

1Plot the points A(4,3), B(−2,3), C(−2,−1) and D(4,−1). What shape do they form? State which quadrant (or axis) each point lies in.
−2 −1 1 2 3 4 5 −2 −1 1 2 3 4 x y O A (4, 3) B (−2, 3) C (−2, −1) D (4, −1)

A, B, C, D form a rectangle spanning all four quadrants.

A(4,3) lies in Quadrant I (x > 0, y > 0). B(−2,3) lies in Quadrant II (x < 0, y > 0). C(−2,−1) lies in Quadrant III (x < 0, y < 0). D(4,−1) lies in Quadrant IV (x > 0, y < 0).

AB and CD are horizontal (length \(4-(-2)=6\) units); BC and AD are vertical (length \(3-(-1)=4\) units). Opposite sides are equal and all angles are 90°.

ABCD forms a rectangle, 6 units by 4 units, with one vertex in each of the four quadrants.
2Find the distance between the points P(1,2) and Q(4,6).
1 2 3 4 5 6 1 2 3 4 5 6 7 x y O P (1, 2) Q (4, 6) (4, 2) 3 4 5

Right triangle with horizontal shift 3 and vertical shift 4 from P to Q, so PQ = 5.

Using the distance formula: \(PQ=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}\)

\(PQ=\sqrt{(4-1)^2+(6-2)^2}=\sqrt{3^2+4^2}=\sqrt{9+16}=\sqrt{25}=5\)

PQ = 5 units.
3Show that the points A(3,0), B(6,4) and C(−1,3) form a right triangle.
−1 1 2 4 5 6 7 1 2 3 4 5 x y O A (3, 0) B (6, 4) C (−1, 3)

Triangle ABC with AB = 5, CA = 5 and BC = √50: the angle at A is a right angle.

Find all three side lengths using the distance formula.

\(AB=\sqrt{(6-3)^2+(4-0)^2}=\sqrt{9+16}=\sqrt{25}=5\)

\(BC=\sqrt{(-1-6)^2+(3-4)^2}=\sqrt{49+1}=\sqrt{50}\)

\(CA=\sqrt{(3-(-1))^2+(0-3)^2}=\sqrt{16+9}=\sqrt{25}=5\)

Check: \(AB^2+CA^2=25+25=50=BC^2\). Since this matches the Baudhāyana–Pythagoras theorem, the angle at A is 90°.

AB = 5, CA = 5, BC = √50, and AB² + CA² = BC² — so △ABC is right-angled at A.
4Find the point on the y-axis that is equidistant from A(2,3) and B(−2,5).
−3 −2 −1 1 2 3 1 2 3 4 5 6 x y O A (2, 3) B (−2, 5) P (0, 4)

P(0, 4) on the y-axis is equally far from A(2, 3) and B(−2, 5): PA = PB = √5.

Let the required point be \(P(0,y)\), since any point on the y-axis has x-coordinate 0.

Set \(PA=PB\), or equivalently (to avoid square roots) \(PA^2=PB^2\):

\((0-2)^2+(y-3)^2=(0-(-2))^2+(y-5)^2\)

\(4+y^2-6y+9=4+y^2-10y+25\)

\(-6y+13=-10y+29\)

\(4y=16 \Rightarrow y=4\)

The required point is P(0, 4).
5Find the reflection of the point P(−5,3) (i) in the x-axis, and (ii) in the y-axis.
−6 −4 −2 2 4 6 −4 −3 −2 −1 1 2 3 4 x y O P (−5, 3) (−5, −3) (5, 3)

P(−5, 3), its reflection (−5, −3) in the x-axis, and its reflection (5, 3) in the y-axis.

Reflecting a point in the x-axis keeps the x-coordinate the same and negates the y-coordinate.

(i) Reflection of P(−5,3) in the x-axis: \((-5,-3)\)

Reflecting a point in the y-axis keeps the y-coordinate the same and negates the x-coordinate.

(ii) Reflection of P(−5,3) in the y-axis: \((5,3)\)

(i) (−5, −3)
(ii) (5, 3).
6Find the midpoint of the line segment joining A(−3,7) and B(9,−5).
−8 −6 −4 −2 2 4 6 8 10 −6 −4 −2 2 4 6 8 x y O A (−3, 7) B (9, −5) M (3, 1)

M(3, 1) is the midpoint of the segment joining A(−3, 7) and B(9, −5).

The midpoint formula is \(M=\left(\dfrac{x_1+x_2}{2},\dfrac{y_1+y_2}{2}\right)\).

\(M=\left(\dfrac{-3+9}{2},\dfrac{7+(-5)}{2}\right)=\left(\dfrac{6}{2},\dfrac{2}{2}\right)=(3,1)\)

Midpoint = (3, 1).
7A rectangular garden has corners at (0,0), (12,0), (12,8) and (0,8). A tree is planted exactly at the centre of the garden. Find the coordinates of the tree, and its distance from each corner.
2 4 6 8 10 14 2 4 6 x y Tree (6, 4) (0, 0) (12, 0) (12, 8) (0, 8)

The tree at (6, 4), the centre of the rectangular garden, is √52 from every corner.

The centre of a rectangle is the midpoint of either diagonal, e.g. from (0,0) to (12,8):

Tree position \(=\left(\dfrac{0+12}{2},\dfrac{0+8}{2}\right)=(6,4)\)

Distance from the tree (6,4) to each corner, using the distance formula:

To (0,0): \(\sqrt{6^2+4^2}=\sqrt{36+16}=\sqrt{52}\)

To (12,0): \(\sqrt{6^2+4^2}=\sqrt{52}\)

To (12,8): \(\sqrt{6^2+4^2}=\sqrt{52}\)

To (0,8): \(\sqrt{6^2+4^2}=\sqrt{52}\)

All four distances come out equal, which makes sense — the centre of any rectangle is equidistant from all four corners.

Tree is at (6, 4); its distance from every corner is √52 ≈ 7.2 units.

Frequently Asked Questions

The origin, where the x-axis and y-axis meet, always has coordinates (0, 0).
Use the distance formula, derived from the Baudhāyana–Pythagoras Theorem: for points \((x_1,y_1)\) and \((x_2,y_2)\), the distance is \(\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}\).
Quadrant I: both coordinates positive (+, +). Quadrant II: x negative, y positive (–, +). Quadrant III: both negative (–, –). Quadrant IV: x positive, y negative (+, –).
Only if x = y. In general, (x, y) and (y, x) are different points — the order of the coordinates matters, since the first coordinate always measures distance from the y-axis and the second from the x-axis.
Yes — the distance formula is a direct application of the Baudhāyana–Pythagoras Theorem. The horizontal and vertical gaps between two points form the two legs of a right triangle, and the straight-line distance between the points is the hypotenuse, so squaring and adding those two gaps and taking the square root gives the distance, exactly as the theorem describes.
© Boundless Maths — Free CBSE Class 9–12 NCERT Solutions, Formula Cards & Question Banks.
Expert CBSE Coaching · Class 9–12