Class 9 Science Chapter 11 Reproduction NCERT Solutions | Boundless Maths
📗 Exploration · CBSE 2026-27 🧬 Biology · Reproduction ✨ Free — No Sign-up 51 Questions

Class 9 Science Chapter 11:
Reproduction: How Life Continues

NCERT Class 9 Science Chapter 11 question answers for Reproduction: How Life Continues (CBSE 2026-27), covering every Think It Over, Activity, Pause & Ponder, Threads of Curiosity, Revise Reflect Refine and Journey Beyond question with full reasoning. Use it with your Class 9 Science Ch 11 notes to check each answer.

Reproduction: How Life Continues covers how new individuals arise, and these Class 9 Science Chapter 11 NCERT solutions explain asexual reproduction (budding, spore formation, cutting, grafting, layering and tissue culture), pollination and fertilisation in flowers, meiosis and variation, the human reproductive system and the menstrual cycle, with full biological reasoning for every question rather than just labelled diagrams.

Last updated 20 October 2026 · Reviewed by Suchita Arora, 13+ years teaching CBSE Maths & Science

51
Questions Solved
8
Question Sections
₹0
Cost — Always Free
100%
In-text Coverage
Overview

What Chapter 11 Is Really About

Reproduction: How Life Continues explores how every living being produces new individuals of its own kind. It contrasts asexual reproduction — budding, spore formation and vegetative propagation, which involve one parent and produce genetically identical clones — with sexual reproduction, where meiosis and the fusion of gametes from two parents create genetic variation. It follows this idea from flowers (pollination, fertilisation, fruit and seed formation) through reproductive strategies in animals to the human reproductive system, the menstrual cycle, pregnancy and reproductive health. Every question is solved here, section by section, as complete Class 9 Science Chapter 11 NCERT solutions with answers.

🌱

Asexual Reproduction

Vegetative propagation, budding in yeast and hydra, and spore formation in fungi — all producing genetically identical clones through mitosis.

🌸

Sexual Reproduction & Variation

Meiosis, gametes, pollination, fertilisation, and how mixing genetic material from two parents creates the variation species need to adapt.

👶

Human Reproduction

The male and female reproductive systems, the menstrual cycle, pregnancy, childbirth, and reproductive health including contraception and STIs.

Section A

Think It Over (Chapter Opener)

2 Questions
Q1When does a farmer prefer asexual or sexual methods of reproduction for crops production?▾

Asexual (vegetative) methods: cutting, grafting, layering and tissue culture.

These give offspring that are genetically identical to the parent plant.

So a farmer prefers them when he wants every new plant to have the same good traits (for example, a high-yielding fruit variety such as a grafted rose, banana or sugarcane).

They are also preferred when the crop is propagated from stems or tubers (potato, ginger, sugarcane) and when plants must be multiplied quickly on a large scale.

Sexual methods (growing from seeds): the offspring show variation, because the characters of two parents are mixed.

So a farmer prefers them when he wants new, hardier or disease-resistant varieties (hybrid seeds) and for cereal and pulse crops such as wheat, rice and maize, which are grown from seeds that are easy to store and sow.

Answer
Asexual methods for fast, uniform plants with the same desired traits. Sexual methods (seeds) for variation, new varieties and crops grown from seeds.
Q2Why do you think most complex animals and flowering plants use sexual reproduction, while many simple organisms, like yeast and hydra mainly reproduce asexually?▾

Sexual reproduction mixes the characters of two parents, so the offspring show variation.

Variation helps a population to adapt to a changing environment and to survive new diseases. Over many generations it can even give rise to new species.

Complex animals and flowering plants live long, make fewer offspring and face many changes in their surroundings, so this variation is very useful for them.

Yeast and hydra are simple organisms. They can multiply quickly with just one parent, by budding, when conditions are favourable. Asexual reproduction needs no partner, saves energy and increases the population fast.

Answer
Complex organisms gain from the variation of sexual reproduction. Simple organisms such as yeast and hydra can multiply fast with one parent by budding, so they mainly reproduce asexually.
Section B

Activities 11.1 – 11.7

7 Questions
11.1Activity 11.1: Let us explore1.Interact with gardeners working in your school garden or farmers working in a field.2.Observe the techniques of cutting, grafting and layering followed by them. Discuss these techniques with them and record your observations in your notebook.C1.Cutting: Note the following points while observing the technique of cutting in the field. (i) Does the gardener, scientist or horticulturist cut the overgrown branches of a plant at the end of its growing season? (Different plants have different growing seasons). (ii) Observe them prepare the cuttings from a plant for the purpose of growing new plants. Note the average length of the cuttings. (iii) Count the number of nodes and internodes on the cuttings.C2.Collect the cuttings of the shoots in the morning for planting.C3.Remove leaves from the lower half of each cutting.C4.Insert the cuttings up to approximately half of their length in the soil mixed with compost at an angle of about 45– 60° from the soil surface (Fig. 11.2).C5.Water them regularly and observe the change, if any.G1.Grafting: For grafting, take a healthy rooted plant (Plant A) (for example, a wild rose variety) and a healthy stem piece from another plant (Plant B) of other varieties (for example, a yellow rose plant and/or a pink rose plant).G2.Create a wound or a slit on a twig of Plant A (Fig. 11.3b).G3.Insert and fit the cutting of stem of Plant B into the slit of stem of Plant A (Fig. 11.3e).G4.Protect the wound or slit by using a cotton cloth or by wrapping film to avoid pests entering the graft until it heals (Fig. 11.3f). Cut the other branches of Plant A.G5.Water the plant regularly and observe the growth of Plant B along with Plant A.L1.Layering: For layering, select a flexible, thin twig of a tree or a shrub, such as a lemon and bury the middle part of the twig under the soil surface (Fig. 11.4).L2.Water it regularly and observe the growth of new leaves on the twig buried in the soil.L3.After 10 – 15 days, the roots will develop from the area of the twig buried in the soil.L4.Once roots have developed, cut the twig from the parent plant, so that it can grow as a new plant.▾
Fig. 11.2: a stem cutting planted in soil
Fig. 11.2 — Cutting
Fig. 11.3: steps of grafting, panels (a) to (g)
Fig. 11.3 — Steps of grafting
Fig. 11.4: layering, a twig buried in soil that grows roots while attached to the parent plant
Fig. 11.4 — Layering

Sample observations (your own readings from the field may differ):

TechniqueWhat the gardener doesWhat is observed
CuttingCuts a shoot piece about 15–20 cm long with 3–4 nodes. Removes the lower leaves and plants half of it in compost-mixed soil at 45–60°.Roots and new shoots appear from the nodes after watering. A new plant grows.
GraftingMakes a slit in the rooted wild rose (Plant A), fits the stem of the yellow rose (Plant B) into it and wraps it with cloth or film.After the wound heals, Plant B grows on the roots of Plant A and gives yellow roses.
LayeringBuries the middle part of a flexible lemon twig in soil, keeping its tip above the ground.Roots grow from the buried part in 10–15 days. The twig is then cut off and grows as a new plant.

In all three methods a part of one parent plant grows into a new plant. No seed or gamete is involved.

Conclusion
Cutting, grafting and layering are methods of vegetative propagation. They use only one parent, so the new plant is a clone with the same characters.
11.2Activity 11.2: Let us explore1.Take 20 mL of sugar solution (1 g in 10 mL) in a test tube.2.Add a pinch of yeast granules to it and then place a cotton plug on the mouth of the test tube.3.Keep it undisturbed in a warm place to allow the yeast to become active.4.After 1 – 2 hours, place a small drop of the yeast mixture from the test tube onto a glass slide and mount it with a coverslip.5.Observe the slide under a compound microscope at different magnifications and draw a diagram of what you observe.Do you observe any small, round outgrowths (buds) emerging from the parent yeast cells as shown in Fig. 11.6? Do these features indicate that the yeast is duplicating? How do these observations help you in understanding reproduction in yeast?▾
Fig. 11.6: yeast cells with small outgrowths (buds) seen under a microscope
Fig. 11.6 — Yeast with outgrowths

Do you observe buds? Yes. Many yeast cells show small, round outgrowths (buds) on the parent cell. Some buds are seen still attached and some have separated.

Do these features indicate that the yeast is duplicating? Yes. The bud grows in size, gets its own nucleus, and separates from the parent cell as a new yeast cell.

How do the observations help? They show that yeast reproduces asexually by budding, with a single parent and no gametes. In warm sugar solution the yeast gets food and warmth, so it multiplies fast and the number of cells increases.

The cotton plug lets air in but keeps dust and other microbes out.

Conclusion
Yeast reproduces by budding. The small round outgrowths are buds that separate to become new yeast cells.
11.3Activity 11.3: Let us experiment1.Take a small slice of bread or a roti and lightly moisten it with a few drops of water.2.Prepare a moist chamber using a plastic box or steel dabba. Place a thin layer of cotton in it, cover it with tissue paper and moisten it with pre-boiled water. Put the slice of bread or roti on the wet cotton bed covered with tissue paper.3.Keep the moist chamber in a warm and dark place, away from direct sunlight (if the bread or roti starts drying, add a few drops of water to keep it moist).4.Observe the bread or roti every day for any changes. Record your observations without touching it directly.5.After three days, observe the surface of the bread or roti carefully using a magnifying glass. Do you notice the growth of mould?6.When enough mould grows and spreads on it, carefully take the box to the school laboratory.7.With the help of a needle, carefully transfer a little mould onto a microscope slide. Under the guidance of your teacher, add cotton blue stain — a coloured dye to help see it better.8.Observe the mould under the microscope and draw its diagram based on your observations.9.Compare the diagram you have drawn with Fig. 11.8 and share your observations with your classmates.Do you observe thread-like structures with a round sac at the tip? Do you also see tiny round structure (spores) inside the sac? Where did the mould on your bread slice come from? It was not present when the bread was fresh.▾
Fig. 11.8: fungi, (a) Rhizopus showing hyphae, sac and spores, (b) Aspergillus
Fig. 11.8 — Fungi: (a) Rhizopus, (b) Aspergillus

Step 4 (daily observation): Day 1: no change. Day 2: a few white cottony patches appear. Day 3 onwards: the patches spread, and black (or green) dots appear on them.

Step 5: Yes, the mould is seen growing on the surface of the bread.

Step 8 (under the microscope): Yes, long thread-like structures (hyphae) are seen. At the tip of some threads there is a round sac, and inside it many tiny round structures (spores).

Where did the mould come from? From spores already present in the air. They settled on the moist bread, found warmth and moisture, and began to grow and multiply rapidly.

The chamber is kept warm (25–35 °C) because spores need warmth and moisture to grow. At lower temperatures their reproduction slows down or stops, which is why we keep food in a refrigerator.

Spores are light, single-celled and produced in huge numbers. They float in the air and germinate into new moulds when they land on a suitable place.

Conclusion
Bread mould reproduces by spore formation, an asexual method. The spores come from the air.
11.4Activity 11.4: Let us explore1.Take three pairs of beads of different colours (Fig. 11.9), each pair representing two contrasting characters on different chromatids of different chromosomes, such as: Pair 1 (green): One light green bead and one dark green bead representing blonde and black hair colour, respectively on different chromatids of chromosome 1. Pair 2 (blue): One light blue bead and one dark blue bead representing straight and curly hair, respectively on different chromatids of chromosome 2. Pair 3 (red): One light red bead and one dark red bead representing brown and black eye colour, respectively on different chromatids of chromosome 3.2.Make a combination from it by randomly picking one bead from each pair.3.Write your combination as ‘light green, light blue, light red’.4.How many combinations can you make with just these three pairs of characters? Each time you make a combination using beads, you will get either the same combination or a different one. With just three pairs of characters, eight combinations are possible.5.Imagine how many combinations are possible with 23 pairs of chromosomes, each carrying genetic information for many characters.▾
Fig. 11.9: segregation of characters during gamete formation by meiosis, using three pairs of coloured beads
Fig. 11.9 — Understanding the segregation of characters during the formation of gametes by meiosis

Steps 2 and 3: picking one bead from each pair, one such combination is ‘light green, light blue, light red’ (blonde, straight hair, brown eyes).

Step 4: each pair gives 2 choices. The choices are independent, so they multiply.

\[2 \times 2 \times 2 = 2^3 = 8\]

The 8 combinations are:

No.Combination of beadsCharacters
1light green, light blue, light redblonde, straight, brown eyes
2light green, light blue, dark redblonde, straight, black eyes
3light green, dark blue, light redblonde, curly, brown eyes
4light green, dark blue, dark redblonde, curly, black eyes
5dark green, light blue, light redblack hair, straight, brown eyes
6dark green, light blue, dark redblack hair, straight, black eyes
7dark green, dark blue, light redblack hair, curly, brown eyes
8dark green, dark blue, dark redblack hair, curly, black eyes

Step 5: with 23 pairs of chromosomes, each pair gives 2 choices:

\[2^{23} = 83{,}88{,}608\]

This is more than 83 lakh different combinations of characters in the gametes of one person.

This random mixing makes children genetically different from their parents and also from their siblings.

Answer
With 3 pairs, 8 combinations are possible. With 23 pairs, 2²³ = 83,88,608 combinations are possible.
11.5Activity 11.5: Let us explore1.Collect different types of flowers from your surroundings.2.Carefully observe each part of the flowers you have collected, starting from the outer whorl to the inner one.3.Record the presence of various floral parts in the different flowers that you collected in Table 11.1.4.Analyse the function of each part of the flower based on visible characters.5.Cut a transverse and a longitudinal section of the ovary (swollen base of the pistil) and observe it under a dissecting microscope.6.Record any other feature(s) in Table 11.1.7.Draw a diagram of the structure you observed under the microscope.▾

Table 11.1 (sample observations). Flowers: A = pumpkin female flower, B = pumpkin male flower, C = china rose (hibiscus), D = mustard.

Flower partABCDOther feature(s)Guess the function
SepalYesYesYesYesGreen, leaf-like, outermostProtects the flower in the bud stage
PetalYesYesYesYesColoured, often scentedAttracts insects and birds for pollination
StamenNoYesYesYesThin filament with an anther at the tip; yellow powder (pollen) on the antherMale part. Produces pollen grains with male gametes
PistilYesNoYesYesStigma (sticky) at the top, a thin style, swollen ovary at the baseFemale part. Receives pollen. Ovary contains ovules with egg cells

Step 5: in the section of the ovary, small round ovules are seen attached inside it. Each ovule has an egg cell.

A complete flower has all four parts: sepals, petals, stamens and pistil. Flower A has no stamen and flower B has no pistil, so they are not complete.

Stigma Style Ovary Ovule Anther Filament Petal Sepalwww.boundlessmaths.com
Fig. 11.10 (redrawn): longitudinal section of a flower. Stamen = anther + filament. Pistil = stigma + style + ovary
Conclusion
Sepals protect the bud, petals attract pollinators, the stamen produces pollen (male gametes) and the pistil holds the ovules with the egg cells (female gametes).
11.6Activity 11.6: Let us investigate1.Identify sweet pea (matar) or garden pea plants in a garden or a nearby field.2.Select two juvenile (less developed) flower bud and three freshly blossomed flowers on the same pea plant.3.Carefully remove the stamens from one of the two selected flowers buds and one of the three selected flowers.4.Take muslin cloth bags and loosely wrap them around the flower bud, the flower bud of which stamens are removed, the flower of which stamens are removed and a freshly blossomed flower (Fig. 11.12).5.Leave one freshly blossomed flower uncovered (without muslin cloth bag).6.Observe them regularly and notice the development of fruits in place of the flowers that were not covered with muslin cloth. Allow them to grow for a few more days.7.Once the pods are fully developed in the flowers without muslin cloth, remove the muslin cloth from all the wrapped flowers and observe them.8.Note your observations in Table 11.2.In which treatment(s) do you find the flowers are replaced by fruits? What can we infer from this activity?▾
Fig. 11.12: experimental set-up for pollination in a pea plant
Fig. 11.12 — Experimental set-up for pollination

Table 11.2 (observations):

TreatmentFruit formation
Flower bud (wrapped with muslin cloth bag)Yes
Flower bud with removed stamens (wrapped with muslin cloth bag)No
Flower with removed stamens (wrapped with muslin cloth bag)Yes
Flower (wrapped with muslin cloth bag)Yes
Flower (without muslin cloth bag)Yes

In which treatments are the flowers replaced by fruits? In all treatments except the flower bud whose stamens were removed.

Why does that bud give no fruit? Its stamens were removed before the flower opened, and the muslin bag kept out all outside pollen. So no pollen reached its stigma.

Why do the other treatments give fruit? In them, pollen had already reached the stigma (from its own anthers, or from visiting insects in the uncovered flower).

Inference
The transfer of pollen grains from the anther to the stigma is necessary for the formation of fruit. This transfer is called pollination.
11.7Activity 11.7: Let us find out
Studies of pollen production and seed formation by two different pollination strategies in different flowers show the following approximate trends (Table 11.3): wind-pollinated grasses (e.g., maize, wheat) release 5,00,000–10,00,000 pollen grains per flower and form 50–200 seeds on average. Insect-pollinated plants (e.g., sunflower) release 20,000–40,000 pollen grains per flower and form 800–1,000 seeds on average.1.Compare and analyse the two strategies in terms of (Table 11.3) — Pollen to seed ratio; Efficiency of pollination and seed formation.2.Explain why producing a very large number of pollen grains can still be an effective pollination strategy.
▾

1. Pollen to seed ratio = pollen grains released ÷ seeds formed

Wind-pollinated grasses: smallest ratio uses the least pollen and the most seeds.

\[\dfrac{5{,}00{,}000}{200} = 2500\]

Largest ratio uses the most pollen and the fewest seeds.

\[\dfrac{10{,}00{,}000}{50} = 20000\]

So wind-pollinated plants use about 2,500 to 20,000 pollen grains for each seed.

Insect-pollinated plants:

\[\dfrac{20{,}000}{1000} = 20\]

and

\[\dfrac{40{,}000}{800} = 50\]

So insect-pollinated plants use only about 20 to 50 pollen grains for each seed.

StrategyPollen per flowerSeeds per flowerPollen grains per seed
Wind (maize, wheat)5,00,000–10,00,00050–2002,500–20,000
Insects (sunflower)20,000–40,000800–1,00020–50

Efficiency: insect pollination is much more efficient. It needs far fewer pollen grains per seed and gives more seeds per flower, because an insect carries pollen directly from flower to flower. Wind carries pollen in all directions and most of it is wasted.

2. Why a huge amount of pollen is still effective:

Wind carries the pollen by chance, so only a tiny fraction lands on a stigma of the same kind of plant.

Producing millions of light grains makes sure that enough of them reach the stigmas, so seeds are formed.

Pollen is light and cheap to make, and the flower does not spend energy on petals, nectar or scent to attract insects. Grasses also grow close together, so the pollen cloud often reaches neighbouring flowers.

Answer
Wind pollination needs about 2,500–20,000 pollen grains per seed and insect pollination only 20–50. Insect pollination is more efficient, but wind-pollinated plants make up for the loss by producing a huge number of pollen grains.
Section C

Pause and Ponder

11 Questions
P1In a china-rose (hibiscus or gudhal) plant, a pollen tube grows and continues through the style after pollen lands on the stigma. Which process is about to happen next?▾

The pollen tube grows down through the style and reaches the ovary.

It carries the male gamete to the ovule.

The male gamete then fuses with the egg cell present in the ovule.

Answer
Fertilisation is about to happen. The male gamete fuses with the egg cell to form a zygote.
P2Look at the pictures (Fig. 11.16) of calotropis (madar) seeds and dandelion seeds given below. Can you guess what kind of seed dispersal these seeds are adapted for?▾
Fig. 11.16: (a) madar seeds and (b) dandelion seeds
Fig. 11.16 — (a) Madar seeds, (b) Dandelion seeds

In the pictures, the madar (calotropis) seeds and the dandelion seeds carry tufts of fine, light hairs.

These hairs act like tiny parachutes. They make the seeds very light and let them float in the air.

So the wind can carry the seeds over long distances.

Answer
Both seeds are adapted for dispersal by wind.
P3A farmer plants two varieties of maize side by side, but notices that seeds form only when pollen from one variety reaches the stigma of the other. What type of pollination is this?▾

The two varieties are two different plants of the same species.

The seeds form only when pollen goes from the anther of one variety to the stigma of the other variety.

Transfer of pollen from a flower of one plant to the stigma of a flower of another plant of the same type is cross-pollination.

Answer
Cross-pollination.
P4Why do animals with external fertilisation generally produce more eggs than animals with internal fertilisation?▾

In external fertilisation (fish, frogs) the eggs and sperm are released into water.

Many eggs are never fertilised, because the sperm may not reach them.

Many of the fertilised eggs are destroyed by water currents or eaten by other animals, so very few young ones survive.

To make up for this loss, these animals produce a very large number of eggs (see Table 11.4: frog 5,000–50,000, fish 100s–1000s).

In internal fertilisation (lizards, birds, mammals) the fertilised egg or embryo is protected inside the female body or in a shelled egg, so more of the young ones survive and fewer eggs are enough (lizard 2–20, bird 1–15).

Answer
Because in external fertilisation many eggs are lost and few young ones survive, a large number of eggs improves the chance that some survive.
P5In animals, which fertilisation method the gametes are more protected?▾

In internal fertilisation, the sperm and the egg meet inside the body of the female.

The fertilised egg or the embryo is protected inside the mother's body, or inside an egg that has yolk and a shell.

In external fertilisation the gametes are released in water, where they can be washed away or eaten.

Answer
Internal fertilisation.
P6Ravi suddenly notices that he is growing taller rapidly, his shoulders are broadening, and his voice cracks. What stage of life is he entering?▾

A rapid increase in height, broadening of shoulders and cracking of the voice are physical changes seen in boys when their reproductive organs mature.

The testes start producing a hormone that brings about these changes, and sperm production begins.

Answer
Ravi is entering puberty (adolescence), the stage when reproductive maturity begins.
P7Rina’s period occurs every 28 days. Her last period was on the 5th of March. On which day is she most likely to get her next period?▾

Given: cycle length = 28 days, last period started on 5 March

To find: date of the next period

Next period = 5 March + 28 days.

March has 31 days, so 5 March + 26 days = 31 March. The remaining 2 days take us to 2 April.

\[5 + 28 = 33\] \[33 - 31 = 2\]
0 7 14 21 28 0 Day of the cycle Uterine lining Periods Ovulation Thick lining www.boundlessmaths.com
Fig. 11.21 (redrawn as a graph): the lining is shed on days 1–5, rebuilds on days 6–14, the egg is released on day 14, and the lining keeps thickening on days 15–28

The graph shows one full 28-day cycle. The lining starts shedding again at the end of the cycle, on about day 28, and the next cycle begins.

Answer
Rina is most likely to get her next period on 2 April.
P8A human zygote has just formed. How many chromosomes does it have?▾

A sperm cell has 23 chromosomes and an egg cell has 23 chromosomes, because gametes are formed by meiosis, which halves the number.

The zygote is formed by the fusion of one sperm and one egg.

\[23 + 23 = 46\]

This is the same number as in the cells of the parents.

Answer
The zygote has 46 chromosomes (23 pairs).
P9What protective devices can be used during sexual activity to reduce the spread of STIs?▾

Sexually transmitted infections (STIs) such as gonorrhoea, herpes, syphilis, genital warts and HIV pass from an infected person to an uninfected person through close physical contact.

A barrier that stops the microbes from passing between the partners protects against them.

Condoms are the protective devices. They also help to prevent pregnancy.

Answer
Condoms (a barrier method) reduce the spread of STIs.
P10If a couple uses oral contraceptive pills but not condoms, which risks remain and why?▾

Oral contraceptive pills contain hormones that change the release of eggs, so they help to prevent pregnancy.

They do not form any barrier between the partners.

So the microbes causing STIs (gonorrhoea, herpes, syphilis, genital warts, HIV) can still pass from one partner to the other.

Pills may also have side effects, because they alter the hormones.

Answer
The risk of getting sexually transmitted infections remains, because pills do not act as a barrier against the microbes. Pills only prevent the release of eggs.
P11In many animals, the young ones can walk or find food soon after birth but human babies are completely dependent for a long time. What might be some advantages and disadvantages of this for humans as a species?▾

Advantages:

1. The long period of care gives the child time to learn language, skills and social behaviour from parents and family.

2. The brain can keep developing and learning after birth.

3. The care and feeding (breast milk) by the mother give strong protection against disease and danger.

4. It builds strong family and social bonds.

Disadvantages:

1. Parents have to spend a lot of time, energy and resources for many years.

2. The baby is helpless against predators, hunger and disease if it is not cared for.

3. A mother can have fewer children, so the population grows slowly.

4. If the parents die or are unable to care, the child's survival is at risk.

Answer
Advantages are learning, brain development, protection and social bonding. Disadvantages are heavy demand on parents, the helplessness of the baby, and fewer offspring.
Section D

Questions from the Text

4 Questions
IN1What do you think will happen if pollination does not occur?▾

Pollen grains will not reach the stigma, so no pollen tube will grow.

The male gamete will not reach the egg in the ovule, so there is no fertilisation and no zygote.

The ovary will not grow into a fruit and the ovules will not become seeds.

The flower will wither and fall off, and no new plant will grow from seeds.

Activity 11.6 showed this: the flower bud with stamens removed and covered with a muslin bag gave no fruit.

Answer
Without pollination, there will be no fertilisation, no fruit and no seeds.
IN2Do you think that sepals protect flowers in the bud stage, along with other parts of the flower when it blooms?▾

In a flower bud, the green sepals form the outermost whorl and cover all the inner parts.

They protect the delicate petals, stamens and pistil in the bud stage from sun, rain, dryness and insects.

When the flower blooms, the sepals remain at the base. They support the petals and the other parts of the flower.

Answer
Yes, sepals protect the flower in the bud stage and support it when it blooms.
IN3Can you guess the function of the most attractive part of a flower — the coloured petals?▾

Petals are coloured and often have a fragrance.

These features attract insects, birds and other pollinators to the flower.

When a pollinator visits the flower for nectar, pollen sticks to its body and is carried to the stigma of another flower.

Petals also help to protect the inner parts of the flower.

Answer
The coloured petals attract pollinators, which helps in pollination.
IN4Do you know any fungus that can degrade plastic?▾

Some fungi can break down plastic. Aspergillus tubingensis is reported to degrade polyurethane plastic, and Pestalotiopsis microspora has also been reported to do so.

These fungi release enzymes that break the chemical bonds of the plastic. They then use it as food.

Fungi grow fast by spore formation and degrade organic wastes and pollutants, so such fungi may help in managing plastic waste in future.

Answer
Yes, for example Aspergillus tubingensis. Such fungi break down plastic using their enzymes.
Section E

Threads of Curiosity & The Quest Continues

2 Questions
TC 1What determines a baby’s biological sex?▾

Every person has two sex chromosomes. Females have XX and males have XY.

The mother has only X chromosomes, so every egg carries an X chromosome.

The father has X and Y, so half of his sperm carry X and half carry Y.

The baby's sex depends on which sperm fuses with the egg:

Sperm (father)Egg (mother)ZygoteBaby
XXXXGirl
YXXYBoy

So there is an equal chance of a girl or a boy.

Answer
The father determines the sex of the baby. An X sperm gives a girl (XX) and a Y sperm gives a boy (XY). The mother always gives X.
QC1Does a unicellular organism like amoeba or yeast ever ‘grow old’? When it divides, it produces almost two identical copies. So, does aging happen at all?▾

When an amoeba divides by binary fission, the parent cell becomes two new cells. No old parent body is left behind, so there is no natural death of old age as in a tree or a human.

Yeast reproduces by budding. The bud is a new cell, but the original (mother) cell remains.

Studies show that a mother yeast cell can produce only a limited number of buds. It slowly gets worn out and finally stops dividing. So the mother cell does age.

The new bud starts afresh. So the line of yeast cells can go on, while a single cell can age.

Scientists are still studying this question, because divisions produce only ‘almost’ identical copies. Damage can pass unequally to the two cells.

Answer
Ageing is not as clear as in many-celled organisms. Yeast mother cells do age after many buds, while the new buds start afresh. So the cell line continues, but individual cells can age.
Section F

Revise, Reflect, Refine

13 Questions
Q1A flower’s anthers are removed before it matures. Later, pollen from another plant of the same species is dusted onto its stigma and seeds are produced. Which process has been ensured here?(i)Self-pollination(ii)Cross-pollination(iii)Fertilisation(iv)Tissue culture▾

Removing the anthers stops the flower from getting pollen from its own stamens, so self-pollination is prevented.

Pollen is then brought from another plant of the same species to its stigma.

Pollen transferred from the anther of one plant to the stigma of another plant of the same kind is cross-pollination.

Tissue culture is a method of asexual reproduction, so (iv) is wrong. Fertilisation takes place after pollination, so the process ensured by dusting the pollen is pollination.

Answer
Option (ii) Cross-pollination.
Q2Arrange the following stages of sexual reproduction in plants in the correct order:(i)Pollen germination on stigma(ii)Fertilisation(iii)Pollination(iv)Formation of zygote▾

Step 1: (iii) Pollination. The pollen lands on the stigma.

Step 2: (i) Pollen germination on the stigma. The pollen grain produces a pollen tube that grows through the style to the ovule.

Step 3: (ii) Fertilisation. The male gamete fuses with the egg cell.

Step 4: (iv) Formation of the zygote. The fertilised egg is the zygote.

Answer
(iii) → (i) → (ii) → (iv)
Q3Assertion (A): The zygote formed after fertilisation immediately attaches to the uterus wall.
Reason (R): The uterus wall is always prepared to receive the zygote.
Choose the correct statement.(i)Both A and R are true, and R is the correct explanation of A.(ii)Both A and R are true, but R is not the correct explanation of A.(iii)A is true, but R is false.(iv)A is false, but R is true.
▾

Assertion A: the zygote is formed in the oviduct. It first divides again and again by mitosis while it travels to the uterus, and only then implants in the lining of the uterus. It does not attach immediately. So A is false.

Reason R: the lining of the uterus becomes thick and rich in blood vessels in every cycle, ready to receive a zygote if one arrives. Taking R in this sense, it is true.

(Strictly, the lining is shed during menstruation, so ‘always’ is not exact. Of the four options, (iv) is the only one that matches A being false.)

Answer
Option (iv): A is false, but R is true.
Q4Why does asexual reproduction produce offsprings that are genetically identical to the parent?▾

Asexual reproduction needs only one parent, and no gametes are formed.

The new individual develops by mitosis, a cell division in which each daughter cell receives the same number of chromosomes, identical to those of the parent cell.

There is no mixing of genetic material from a second parent.

So the offspring have the same genetic material as the parent and are called clones.

Answer
Because the offspring come from one parent by mitosis, which copies the chromosomes exactly, with no mixing of genes.
Q5Explain why the menstrual cycle stops during pregnancy.▾

In the menstrual cycle the lining of the uterus becomes thick and rich in blood vessels to receive a zygote. If no egg is fertilised, the lining is shed as menstruation.

When an egg is fertilised, the zygote divides and implants in the thick lining of the uterus. It takes its nourishment from this lining.

So the lining is not needed to be shed. It stays and supports the growing embryo and foetus for about nine months.

Since pregnancy has begun, the body does not release new eggs each month.

Therefore, there is no menstruation during pregnancy.

Answer
The uterine lining stays to nourish the embryo instead of being shed, and no new eggs are released, so periods stop.
Q6Why are flowers that bloom at night white or light in colour as compared to flowers that bloom during the day?▾

Flowers need pollinators, and flowers that bloom at night are visited by night-flying pollinators such as moths and bats.

At night there is very little light. Dark colours cannot be seen in the dark, but white or light colours reflect the little light that is available.

So they stand out clearly and attract the night pollinators. Many of them also have a strong fragrance.

Day-blooming flowers are visible in sunlight, so they can be brightly coloured to attract insects and birds.

Answer
White or light flowers are easier to see in the dark, so they attract night pollinators.
Q7Why do vegetatively propagated plants tend to be more vulnerable to diseases than sexually reproduced plants?▾

Vegetatively propagated plants come from one parent, so they are genetically identical (clones).

They all have the same weaknesses. If one plant is susceptible to a disease, all of them are.

So a disease can spread quickly and may destroy the whole crop.

Sexually reproduced plants have variation. Some of them may be resistant to the disease and survive, so the species continues.

Answer
Because they are genetically identical, all of them can be affected by the same disease, while sexually reproduced plants show variation and some may resist it.
Q8If all flowers in a type of plant were only capable of self-pollination, how would it affect the genetic diversity over several generations? Explain.▾

In self-pollination, the pollen comes from the same flower or the same plant, so only one parent plant supplies the genetic material.

The seeds that form will be very similar to the parent. There is little mixing of characters from different plants.

Over several generations the genetic diversity will go down, and the plants will become almost alike.

Such a population cannot adapt well when the environment changes or a new disease appears, because it has no variation to select from.

Cross-pollination avoids this, because it brings together the genes of two different plants.

Answer
The genetic diversity would decrease generation after generation, making the species less able to adapt and survive.
Q9A farmer wants to produce a large number of genetically identical plants quickly. Suggest suitable reproduction methods and explain why they are effective.▾

Suitable methods: vegetative propagation by cutting, grafting, layering, and tissue culture.

Why they are effective:

1. They are asexual methods, so they use only one parent. The new plants are clones and have exactly the same good characters.

2. A new plant grows directly from a part of the parent plant, so there is no need to wait for flowering, pollination and seed formation. It is fast.

3. Many new plants can be made from one parent plant. In tissue culture, thousands of plantlets can be grown from a small piece of tissue such as a shoot tip.

4. Tissue culture also gives healthy, virus-free plants.

Answer
Cutting, grafting, layering and tissue culture. They are quick, need one parent, and give identical plants.
Q10Suresh prepares slides with pollen grains in different sugar concentrations (0%, 2.5%, 5%, 7.5%, 10%) to study the germination of pollen.(i)What are the different hypotheses which can be tested using this set-up?(ii)What parameters should be kept the same in this set-up?▾
(i)Hypotheses

The set-up has one changing factor, the sugar concentration. So the hypotheses are about how sugar affects pollen germination:

1. Pollen germination needs sugar, so pollen in 0% sugar will not germinate (or will germinate least).

2. The percentage of germinated pollen increases as the sugar concentration increases, up to a particular concentration.

3. Beyond that best concentration, a more concentrated solution reduces germination.

4. The length of the pollen tube also depends on the sugar concentration.

Ans.Pollen germination depends on the concentration of sugar.
(ii)Parameters kept the same

Only the sugar concentration should change. All these must be the same on every slide:

1. The type (species) and the age of the pollen grains.

2. The amount of pollen put on each slide.

3. The volume of the solution.

4. The temperature and the humidity.

5. The time for which the slides are kept before observing.

6. The method of observation (the same microscope and magnification).

Ans.Everything except the sugar concentration.
Q11Look at the picture given below and think in line with the given prompts and find out which type(s) of pollination might have been followed in these flowers — Tomato: stamens cover the stigma. Wheat: flowers open after pollination. Papaya: male and female flowers are often borne on different papaya trees.▾
(a)Tomato

The stamens cover the stigma, so the pollen falls on the stigma of the same flower.

This is the transfer of pollen within the same flower.

Ans.Self-pollination
(b)Wheat

The flowers open only after pollination has already taken place.

So the pollen reached the stigma of the same flower before it opened.

Ans.Self-pollination
(c)Papaya

Male flowers and female flowers are on different trees.

So the pollen must be carried from a male tree to the female tree by wind or insects.

Ans.Cross-pollination
Q12In the lower Himalayan region of northern India, apples are an important cash crop that contribute significantly to farmer’s livelihoods. The fruit yield in apple cultivation is declining continuously, associated with climate change and a significant decline in the population of natural pollinators. A researcher-farmer group set up two experimental apple orchards at two distinct locations: Places A and B. In apple orchards at Place A, they allowed natural pollinators to pollinate the flowers of the apple. In apple orchards at Place B, they applied mixed farming techniques of beekeeping. Along with honey, the farmer yielded apples. The yield of apples is depicted in Fig. 11.24, in terms of fruit setting (number of fruits/the total number of corresponding fruit-bearing branches) and fruit drop (premature falling of developing fruits) in the two types of experimental places of apple orchards.(i)What are the hypotheses the researcher-farmers group has thought of for this investigation?(ii)What are the different parameters in the experiment?(iii)Compare and analyse the data of two experimental orchards Places A and B, in terms of high yields of apple fruits.(iv)Based on your analysis, what do you infer from the data?▾
10 20 30 40 0 Fruit set (%) 26 40 Fruit drop (%) 35 8 Per cent Natural pollination (Place A) With bee colony (Place B)www.boundlessmaths.com
Fig. 11.24 (redrawn): fruit set and fruit drop in the two apple orchards (values read from the bars)
(i)Hypotheses

1. Keeping bee colonies in the orchard will increase the fruit setting of apple, compared with depending on natural pollinators.

2. Pollination by bee colonies will reduce the premature fruit drop.

3. The decline in natural pollinators is one of the reasons for the falling yield, so adding bees will improve the yield.

Ans.Bee colonies improve fruit set and reduce fruit drop.
(ii)Parameters

Changed (independent) factor: the method of pollination, natural pollinators (Place A) or bee colonies (Place B).

Measured (dependent) parameters: fruit setting (number of fruits ÷ total number of fruit-bearing branches) and fruit drop (premature falling of developing fruits), both in per cent.

Parameters to keep the same: variety and age of the apple trees, orchard management (watering, manure, pest control), and the area and number of branches studied.

Ans.Pollination method, fruit set and fruit drop.
(iii)Comparison of the data
ParameterPlace A (natural)Place B (bee colony)Difference
Fruit set (%)264014 more at B
Fruit drop (%)35827 less at B

Fruit set: it is higher at Place B.

\[40 - 26 = 14\] \[\dfrac{14}{26} \times 100 \approx 54\%\]

So fruit set at B is about 54% higher than at A.

Fruit drop: it is much lower at Place B.

\[35 - 8 = 27\] \[\dfrac{27}{35} \times 100 \approx 77\%\]

So fruit drop at B is about 77% less than at A.

More fruits set and fewer fruits fall, so a higher yield of apples is obtained at Place B.

Ans.Place B has a higher yield.
(iv)Inference

Pollination by bee colonies increases the fruit setting and decreases the fruit drop, so it increases the apple yield.

Beekeeping also gives honey, so the farmer gets extra income.

A limit of the study is that Places A and B are different locations. Other factors, such as climate and soil, may also play a part. So the experiment should be repeated at more places to be sure.

Ans.Bees, as pollinators, improve apple yield.
Q13A student claims, “In humans, ovulation always happens on day 14 of the menstrual cycle”. Critically examine this claim and state whether the claim is correct or not. Give at least two reasons for your answer.▾

The claim is not correct. Ovulation is the release of a mature egg from the ovary. It happens around the 14th day only in a typical 28-day cycle.

0 7 14 21 28 0 Day of the cycle Uterine lining Periods Ovulation Thick lining www.boundlessmaths.com
Fig. 11.21 (redrawn as a graph): the lining is shed on days 1–5, rebuilds on days 6–14, the egg is released on day 14, and the lining keeps thickening on days 15–28

Reason 1: the length of the cycle is not the same for everyone. It is typically 21–35 days, often around 28 days. In a longer cycle ovulation happens later than day 14, and in a shorter cycle it happens earlier.

Reason 2: the cycle can change in the same person from month to month, because of stress, illness or changes in hormones. So the day of ovulation can shift.

Reason 3: in the first years after puberty (age 10–14) and in the years before menopause (around age 50), cycles are often irregular.

The word ‘always’ makes the claim wrong. The correct statement is that ovulation takes place around the middle of the cycle, about the 14th day in a typical 28-day cycle.

Answer
The claim is not correct. The day of ovulation depends on the length of the cycle, which varies from 21 to 35 days and can change from month to month.
Section G

The Journey Beyond

5 Questions
JB1Read about the ‘Seed Village Programme’ (Beej Gram Yojana) run by the Government of India. Why is it important to save indigenous seeds?▾

About the programme: under the Seed Village Programme, farmers are helped to grow and store good quality seeds in their own village. This makes quality seed available locally and cheaply, and reduces dependence on outside sources.

Why it is important to save indigenous seeds:

1. Indigenous (local) seeds are adapted to the local soil, climate, water and pests, so they grow well with fewer fertilisers and pesticides.

2. They keep the genetic diversity of crops. This diversity helps crops to survive new diseases, pests and climate change.

3. Farmers can save seeds from their own crop and sow them again, so they do not have to buy seeds every year. Seeds of hybrid varieties do not breed true when saved and resown.

4. Many indigenous varieties have special taste, nutrition and cultural value, and once lost, they cannot be brought back.

5. It protects food security and the farmer's independence.

Answer
Saving indigenous seeds protects crop diversity, local adaptation, low-cost farming and food security.
JB2Prepare a report on IVF, its uses and drawbacks. Discuss it with your class.▾

Report on IVF (In-vitro Fertilisation)

What it is: an egg and a sperm are combined outside the female body, in a laboratory dish. The fertilised egg (embryo) is then placed in the uterus to begin a possible pregnancy. The baby is commonly called a ‘test tube baby’.

History in India: Dr Subhash Mukhopadhyay of Kolkata pioneered India's first test tube baby, Kanupriya Agarwal (nicknamed Durga), in 1978.

Uses:

1. Helps couples who cannot have a baby naturally, for example when the fallopian tubes are blocked.

2. Helps when the sperm count of the male is low or the sperm do not reach the egg.

3. Helps in other cases where fertilisation does not take place inside the body.

Drawbacks:

1. It is costly, and success is not certain. It may need many attempts.

2. The hormone medicines can have side effects, and the process can cause physical and emotional stress.

3. It can lead to twins or more babies at once, which increases health risks.

4. There are ethical and social questions that need discussion in the class.

Answer
IVF helps couples who cannot conceive naturally. Its drawbacks are cost, uncertain success, side effects and ethical questions.
JB3Conduct a survey on crop fields. Interact with farmers on the crops grown on their farms and farm animals based on the following points —(i)Which crops do they grow through vegetative propagation?(ii)Which crops do they grow using seeds?(iii)Which seeds do they use — indigenous varieties or hybrid varieties? Why? How do they develop hybrid varieties in their fields?(iv)List the indigenous breeds and hybrid breeds of the farm animals they are using in their farming practices and how are they different from each other?(v)Discuss in class, and make a report on how asexual and sexual methods of reproduction are useful in agriculture.▾

Sample report (replace with the answers from the farmers you interview):

(i)Vegetative propagation

Sugarcane (stem cuttings), potato, ginger and turmeric (underground stems), banana (suckers or tissue culture), rose and mango (cutting and grafting).

(ii)Grown from seeds

Wheat, rice, maize, mustard, gram, peas, beans, tomato, brinjal and cucumber.

(iii)Indigenous or hybrid seeds

Farmers use hybrid seeds for higher yield, uniform crop and disease resistance. They use indigenous seeds for low cost, good local adaptation, and because they can save the seeds for the next season.

Developing hybrids: the stamens are removed from the flower of one plant, and the flower is covered with a bag to stop self-pollination. Pollen with the desired character, from another plant, is transferred on to its stigma by hand. The seeds formed give the hybrid variety.

(iv)Animal breeds
TypeExamplesFeatures
IndigenousGir, Sahiwal and Tharparkar cows, Murrah buffaloHardy, tolerate heat and local diseases, need less feed, give less milk
Hybrid (crossbred)Jersey or Holstein crosses with local cowsGive more milk, but need more feed, care and medical attention
(v)Report on use in agriculture

Asexual methods (cutting, grafting, layering, tissue culture): fast, give plants identical to the parent with the same good traits, and are useful for fruit trees, sugarcane, potato, banana and flowers.

Sexual methods (seeds): give variation, which helps in developing new hybrid and disease-resistant varieties, and seeds are easy to store, transport and sow.

Farmers use both methods according to the need of the crop.

JB4Explore the crop fields near your school and find out different pollination strategies adopted by different cereal and vegetable crop plants. Talk to farmers on the following points —(i)Pollinators of different crops(ii)Reason for the declining population of pollinators and their solutionsObserve the pollinators visiting your school garden. Notice and record their activity. Let each student take pictures of at least five different types of pollinators and which plants they visit. Compile the data and showcase your work to discuss how pollination occurs in different plants.▾

Sample findings (use your own observations):

CropPollinatorStrategy
Wheat, rice, maizeWindLight pollen in large numbers; long, feathery stigma
Sunflower, mustard, pumpkin, cucumberBees and other insectsBright flowers, nectar and scent; sticky or spiny pollen
Tomato, peaMostly self-pollinated (insects help)Pollen falls on the stigma of the same flower
Hibiscus, coral treeBirds such as sunbirds, and insectsLarge, bright flowers with nectar
(i)Pollinators of crops

Honey bees, wild bees, butterflies, flies, wasps, birds and wind.

(ii)Reasons for the decline and solutions

Reasons: heavy use of pesticides, loss of flowering plants and nesting places, growing a single crop over large areas, climate change and diseases of bees.

Solutions: use fewer pesticides, grow flowering plants and a mix of crops, protect hedges and wild areas, keep bee colonies (beekeeping), and spread awareness among farmers.

Pollinator record: note the name or picture of each pollinator, the plant it visits, the time of the day and what it collects (nectar or pollen). Compile the data of the class in a table and discuss how pollination occurs in different plants.

JB5Assist your elders in cutting fruits in the kitchen. While cutting fruits like lady finger, tomato, brinjal, capsicum, papaya, orange, muskmelon and more, make your observations based on the following and draw diagrams —(i)When you cut a fruit longitudinally (Longitudinal Section: L.S.)(ii)When you cut a fruit transversely (Transverse Section: T.S.)(iii)Attachment of seedsLink your observations of the L.S. and T.S. of the fruit with the internal structure of the ovary of same species.▾

Sample observations (cut the fruits carefully, with the help of an elder):

FruitL.S. and T.S.Attachment of seeds
TomatoSeveral chambers with jelly-like pulp seen in the T.S.Seeds attached to the central part (placenta) in each chamber
Lady finger (okra)Five chambers seen in the T.S.Seeds attached along the inner walls near the centre
BrinjalMany seeds in soft pulpSeeds attached to the central pulpy part
PapayaOne large hollow cavityMany seeds attached to the inner wall
OrangeMany segments around the centre in the T.S.Seeds attached to the central axis of each segment

Link with the ovary: a fruit develops from the ovary of the flower, and the seeds develop from the ovules.

In the L.S. and T.S. of a tomato flower, the ovary has the same chambers, and the ovules are attached at the same place as the seeds in the fruit.

So the number of chambers and the attachment of the seeds in the fruit match the structure of the ovary of the same plant.

Conclusion
The internal structure of a fruit, with its chambers and the attachment of its seeds, is the same as the structure of the ovary and ovules from which it developed.
💡 Chapter 11's core idea, in one line

Every living thing must reproduce to continue its kind — asexually through a single parent and mitosis, producing fast, identical clones, or sexually through two parents, meiosis, and the fusion of gametes, producing genetically varied offspring — and from a Bryophyllum leaf sprouting a plantlet to a nine-month human pregnancy, the same underlying biology of gametes, fertilisation, and development connects flowers, animals, and humans alike.

Extra Practice

The Practice Continues

7 Questions

Seven extra questions in the style of the textbook, for independent practice. Attempt each one on paper first, then tap to check.

EP1A potato sprouting new plants from its “eyes,” an amoeba splitting into two, and a hydra developing a bud that breaks off — classify each as a type of asexual reproduction, naming the specific process.▾
(i)Potato sprouting from its eyes

A new plant grows from a vegetative part (the bud in the eye of the tuber).

Ans.Vegetative propagation
(ii)Amoeba splitting into two

One cell divides into two equal cells.

Ans.Binary fission
(iii)Hydra developing a bud

A bud grows on the parent body, enlarges and separates.

Ans.Budding
EP2Differentiate between asexual and sexual reproduction on the basis of (i) the number of parents, (ii) the formation of gametes, and (iii) the genetic variation among the offspring.▾
BasisAsexual reproductionSexual reproduction
(i) Number of parentsOneTwo (usually)
(ii) GametesNot formedMale and female gametes are formed (by meiosis) and fuse
(iii) OffspringGenetically identical to the parent (clones)Show variation. A mix of characters of both parents
ExamplesYeast, hydra, bread mould, potatoFlowering plants, fish, birds, humans
Answer
Asexual reproduction has one parent, no gametes and identical offspring. Sexual reproduction has two parents, gametes and varied offspring.
EP3A human cell has 46 chromosomes. (i) How many chromosomes are present in a sperm and in an egg? (ii) How many chromosomes are present in the zygote? (iii) The zygote divides by mitosis 3 times. How many cells are formed, and how many chromosomes does each cell have?▾
(i)Sperm and egg

Gametes are formed by meiosis, which halves the number of chromosomes.

Ans.23 in the sperm and 23 in the egg
(ii)Zygote
\[23 + 23 = 46\]
Ans.46
(iii)After 3 divisions

Each mitotic division doubles the number of cells, and every cell has the same number of chromosomes as the zygote.

\[2 \times 2 \times 2 = 8\]
Ans.8 cells, each with 46 chromosomes
EP4All banana plants in a plantation are grown by tissue culture or suckers from one parent plant. A new fungal disease reaches the plantation. Predict what will happen, and compare it with a field of wheat grown from seeds. Suggest one way to reduce the risk in the banana plantation.▾

Banana plantation: the plants are clones, so they are genetically identical. If one plant is not resistant to the fungus, none of them is.

The disease will spread from plant to plant and may destroy the whole plantation.

Wheat field grown from seeds: the seeds come from sexual reproduction, so the plants differ a little from each other. Some plants may be resistant, and they will survive and give seeds.

So the loss in the wheat field is likely to be less.

Reducing the risk: grow more than one variety of banana in the plantation, or use tissue culture from healthy shoot tips so that the plantlets are free from infection. Also grow different crops in turns.

Answer
The identical banana plants will all be affected and the plantation may be lost, while some wheat plants may resist. Growing different varieties reduces the risk.
EP5Meera’s menstrual cycle is 35 days long and her last period began on 10 January. She says that her egg is released on day 14, as her friend’s was. (i) When will her next period start? (ii) On about which day and date is the egg likely to be released? (iii) Why can the ‘day 14’ rule not be used for everyone?▾

Given: cycle length = 35 days, last period began on 10 January (day 1)

(i)Next period

10 January + 35 days. January has 31 days.

\[10 + 35 = 45\] \[45 - 31 = 14\]
Ans.14 February
(ii)Ovulation

In a typical cycle, the egg is released about 14 days before the next period starts.

\[35 - 14 = 21\]

So the egg is released about day 21. Day 1 is 10 January, so day 21 is 30 January.

Ans.About day 21 (around 30 January)
(iii)Why not day 14

The length of the cycle is not the same for everyone, but is typically between 21 and 35 days.

Ovulation is on about day 14 only in a 28-day cycle. In Meera's longer cycle, it happens later.

Ans.Cycle length varies from person to person
EP6A student wants to test whether bees are needed for fruit formation in a pumpkin plant, which has separate male and female flowers. Design a simple experiment. State what you expect in each set-up and what you will conclude.▾

Method: select three groups of female flower buds on pumpkin plants of the same variety and age.

Set-upTreatmentExpected result
1Female flower covered with a muslin bag, so that no insect can reach itNo fruit. No pollen reaches the stigma
2Female flower left uncovered, so bees can visit itFruit forms. Bees carry pollen from the male flowers
3Female flower covered with a bag, pollinated by hand with pollen from a male flower and covered againFruit forms. Pollen is supplied without bees

Things kept the same: variety and age of the plants, water, manure and sunlight, and the size of the muslin bags.

Conclusion: in set-up 1 pollen cannot reach the stigma, because pumpkin has male and female flowers separately, so there is no fruit. Fruit forms in 2 and 3 when pollen reaches the stigma.

So pollination, by bees or by hand, is necessary for fruit formation, and bees are pollinators of pumpkin.

Answer
The covered female flower gives no fruit, while the uncovered and the hand-pollinated flowers give fruit. This shows that pollen transfer, by bees, is needed.
EP7Name the part of the flower that (i) produces pollen, (ii) receives pollen, (iii) develops into the fruit, (iv) develops into the seed, (v) contains the egg cell, and (vi) protects the flower in the bud stage.▾
FunctionPart of the flower
(i) Produces pollenAnther (of the stamen)
(ii) Receives pollenStigma (of the pistil)
(iii) Develops into the fruitOvary
(iv) Develops into the seedOvule
(v) Contains the egg cellOvule (in the ovary)
(vi) Protects the budSepals
Answer
Anther, stigma, ovary, ovule, ovule, sepals.
Common Questions

Frequently Asked Questions

Mitosis produces two genetically identical daughter cells from one parent cell, with the same chromosome number, and is used for growth and repair. Meiosis produces four daughter cells with half the chromosome number, used specifically to form gametes (sperm and egg cells) for sexual reproduction, and introduces genetic variation among offspring.
In sexual reproduction, each offspring receives half of its genetic material from each parent through the fusion of gametes during fertilisation. Since this combination of genes is unique to each fertilisation event, the offspring inherits a mix of traits from both parents rather than being an exact copy of either one, which is why siblings can resemble their parents while still looking different from each other.
Check what produces the new individual. In budding, a small outgrowth (bud) on the parent grows and separates, as in yeast and hydra. In spore formation, tiny spores released from a sac or hypha grow into new individuals, as in Rhizopus bread mould. In vegetative propagation, a part of a plant such as a leaf, stem, cutting, graft or layer grows into a new plant, as with Bryophyllum, potato and rose.
Pollination is the transfer of pollen from the anther to the stigma. Fertilisation happens later, when the male gamete from the pollen tube fuses with the egg cell in the ovule. The pea-plant muslin-bag experiment (Activity 11.6) shows that fruits form only where pollen could reach the stigma, so pollination comes first and fertilisation follows.
No. That is true only for a 28-day cycle. Ovulation happens roughly 14 days before the next period begins, so in a 35-day cycle it falls around day 21. Cycle length varies from person to person and from month to month, which is why the 'always on day 14' claim in Q13 does not hold.
These methods give genetically identical plants, so a variety with desirable qualities is copied exactly, and the new plants usually bear fruit sooner. Tissue culture can also produce many virus-free plantlets from a tiny piece of tissue, which is why it is widely used for banana farming.
Keep Going

Keep Exploring Class 9 Science

Browse the full list of Class 9 Science (Exploration) NCERT Solutions chapters, visit the Class 9 Science hub, or revise with the Class 9 Science Notes, or test yourself with the free Class 9 Science Sample Paper and Marking Scheme.

Expert CBSE Coaching · Class 9–12